Bug load balancing [BFW v2.31.10] Fallo de balanceo de carga
Enviado: Sex Mai 01, 2009 9:19 pmHello every1,
I found curious bug in BFW v2.31.10 (latest build downloaded today - 2nd May 2009)
my config is following:
WAN1: ADSL16Mbps [IP:192.168.0.10/24 GW: 192.168.0.1]
WAN2: ADSL8Mpbs [IP:192.168.11.10/24 GW: 192.168.11.1]
WAN3: ADSL8Mbps [IP:192.168.100.10/24 GW: 192.168.100.1]
LAN: 192.168.1.1
=> 3x ADSL line, 3x NAT (from 3 ADSL modems)
everything works fine (torrents, http...), however FTP over SSL doesn't work. It "hangs" at one line (usually WAN1) and keeps using it. Of course I'm trying many connections (10-20 connections ~ downloading 10-20 files at one time) so I make sure that load balancing is possible.
With "blackbox" ASUS RX3042H (dual WAN router) it works just fine or Edimax BR-6524 (dual WAN router) as well, however I need to use three ADSL lines.
Any solution? IMHO it's a bug...
P.S. I can chain ASUS + Edimax => 3 WANs but Edimax is too old and slow => can't handle even 2x8Mbps...
P.P.S. quad WAN Edimax BR-6641 had same problem as BFW has (didn't work with FTP over SSL), I even contacet Edimax in Taiwan however they didn't know what's wrong.
Thank you for your reply or even better a fix/solution
Spanish translation:
(translated using google translate - hopefully more ppl reply)
I found curious bug in BFW v2.31.10 (latest build downloaded today - 2nd May 2009)
my config is following:
WAN1: ADSL16Mbps [IP:192.168.0.10/24 GW: 192.168.0.1]
WAN2: ADSL8Mpbs [IP:192.168.11.10/24 GW: 192.168.11.1]
WAN3: ADSL8Mbps [IP:192.168.100.10/24 GW: 192.168.100.1]
LAN: 192.168.1.1
=> 3x ADSL line, 3x NAT (from 3 ADSL modems)
everything works fine (torrents, http...), however FTP over SSL doesn't work. It "hangs" at one line (usually WAN1) and keeps using it. Of course I'm trying many connections (10-20 connections ~ downloading 10-20 files at one time) so I make sure that load balancing is possible.
With "blackbox" ASUS RX3042H (dual WAN router) it works just fine or Edimax BR-6524 (dual WAN router) as well, however I need to use three ADSL lines.
Any solution? IMHO it's a bug...
P.S. I can chain ASUS + Edimax => 3 WANs but Edimax is too old and slow => can't handle even 2x8Mbps...
P.P.S. quad WAN Edimax BR-6641 had same problem as BFW has (didn't work with FTP over SSL), I even contacet Edimax in Taiwan however they didn't know what's wrong.
Thank you for your reply or even better a fix/solution
Spanish translation:
(translated using google translate - hopefully more ppl reply)
Hola every1,
Me pareció curioso error en BFW v2.31.10 (más reciente descargado hoy - 2 de mayo de 2009)
mi configuración es siguiente:
WAN1: ADSL16Mbps [IP: 192.168.0.10/24 GW: 192.168.0.1]
WAN2: ADSL8Mpbs [IP: 192.168.11.10/24 GW: 192.168.11.1]
WAN3: ADSL8Mbps [IP: 192.168.100.10/24 GW: 192.168.100.1]
LAN: 192.168.1.1
=> 3x línea ADSL, 3x de NAT (de 3 módems ADSL)
todo funciona bien (torrentes, http ...), sin embargo [b] FTP a través de SSL no funciona [/ b]. Se "cuelga" en una línea (por lo general WAN1) y se sigue usando. Por supuesto que estoy intentando muchas conexiones (10-20 conexiones ~ 10-20 descargar archivos de una vez) así que asegúrese de que el equilibrio de carga es posible.
Con "blackbox" ASUS RX3042H (doble WAN del router) [b] funciona bien [/ b] o Edimax BR-6524 (dual WAN del router) [b] y [/ b], sin embargo tengo que usar tres líneas ADSL .
Cualquier solución? En mi humilde opinión es un error ...
P.S. Puedo cadena ASUS Edimax + => 3 WAN Edimax pero es demasiado viejo y lento => no puede manejar incluso 2x8Mbps ...
P.P.S. WAN quad Edimax BR-6641 había BFW mismo problema que tiene (no trabajar con FTP sobre SSL), que incluso contacet Edimax en Taiwán sin embargo no sabían lo que le pasa.
Gracias por su respuesta o mejor aún una solución / solución> |