I need a little czech translation please:
Enviado:
Ter Dez 18, 2007 9:11 am
por Marcelo - Brazil
Go to this link ->
http://www.sweb.cz/doveda/dmc50799/index.htm
And post here in english the small text in it.
Thanks for help.
Marcelo.
Re: I need a little czech translation please:
Enviado:
Sáb Dez 29, 2007 1:06 pm
por yeager
Zobrazovací jednotka OPTREX DMC-50799 se jednoduchým způsobem upraví jako standardní LCD displej 4x16 s podsvícením a řadičem HD44780. U jednotky nelze nastavit kontrast LCD displeje, protože se nepodařilo najít zapojení kontrastu.
Display unit OPTREX DMC-50799 its simple way adjust look like standard LCD display 4x16 with underlight and controller HD44780. At this units is not possible to set contrast the LCD, because i can not find contrast scheme.
Popis:
1. Vyndáme z patice procesor a GAL.
2. Na obvodu IC14 (74LS04) zvedneme vývod č. 2 a zaletujeme drát E místo vývodu.
3. Do patice obvodu GAL zaletujeme drát RS a R/W.
4. Na obvod LS646 zaletujeme dráty D0 - D7 a GND.
5. Připojíme +5V do 34 pinového konektoru.
Description:
1. Remove processor and GAL from socket.
2. On circuit IC14 (74LS04) connect outlet nr. 2 and soldering wire E place outlet.
3. To GAL circuit socket soldering wire RS and R/W.
4. On circuit LS646 soldering wire D0 - D7 and GND.
5. Connect +5V to 34 pin connector.
maybe help.
PS: I have answered this question onemor time, but my post is missing
Re: I need a little czech translation please:
Enviado:
Qua Jan 02, 2008 11:38 am
por Marcelo - Brazil
Tks so much.
All forum was hacked, is possible that posts was erased by this invasion.