Ok first you find the downloads links here:
viewtopic.php?f=68&t=66590
Before you start anything to do, make sure you have second partition
Use "ps" command to see that. If you have second partition you should see something like this.
- Código: Selecionar todos
13358 root 492 S /partition/......
13429 root 492 S /partition/.......
13430 root 492 S /partition/.......
First install the libs (dunno but seams logical for me to do that, not to have any bug)
After that install the bandwidthd.tgz. Reboot your system and go partition/bandwidthd/etc/ and edit bandwidthd.conf like this
- Código: Selecionar todos
####################################################
# Bandwidthd.conf
#
# Commented out options are here to provide
# documentation and represent defaults
# Subnets to collect statistics on. Traffic that
# matches none of these subnets will be ignored.
# Syntax is either IP Subnet Mask or CIDR
#subnet 10.0.0.0 255.0.0.0
subnet 192.168.0.0/16 (here you edit the class you using, and personally i just used /24)
#subnet 172.16.0.0/12
# Device to listen on
# Bandwidthd listens on the first device it detects
# by default. Run "bandwidthd -l" for a list of
# devices.
#dev "eth0"
###################################################
# Options that don't usually get changed
# An interval is 2.5 minutes, this is how many
# intervals to skip before doing a graphing run
skip_intervals 0
# Graph cutoff is how many k must be transfered by an
# ip before we bother to graph it
#graph_cutoff 1024
#Put interface in promiscuous mode to score to traffic
#that may not be routing through the host machine.
promiscuous true
#Log data to cdf file htdocs/log.cdf
output_cdf true
#Read back the cdf file on startup
recover_cdf true
#Libpcap format filter string used to control what bandwidthd see's
#Please always include "ip" in the string to avoid strange problems
#filter "ip"
#Draw Graphs - This default to true to graph the traffic bandwidthd is recording
#Usually set this to false if you only want cdf output or
#you are using the database output option. Bandwidthd will use very little
#ram and cpu if this is set to false.
#graph true
#Set META REFRESH seconds (default 150, use 0 to disable).
#meta_refresh 150
Dont forget to backup the system , and after reboot the computer.
Hope helps!