pisperling escreveu:Se o micro for desligado ou reiniciado, os dados anteriores são salvos ou os gráficos são apagados?
If the BFW is shut down or restarted, the previous data are saved or the graphics are erased?
#Log data to cdf file htdocs/log.cdf
#output_cdf false <<<====================Change this to true and uncomment the lines
#Read back the cdf file on startup
#recover_cdf false <<<====================Change this to true and uncomment the lines
pisperling escreveu:Thanks!
####################################################
# Bandwidthd.conf
#
# Commented out options are here to provide
# documentation and represent defaults
# Subnets to collect statistics on. Traffic that
# matches none of these subnets will be ignored.
# Syntax is either IP Subnet Mask or CIDR
subnet 10.0.0.0 255.0.0.0
subnet 192.168.0.0/24
subnet 172.16.0.0/12
# Device to listen on
# Bandwidthd listens on the first device it detects
# by default. Run "bandwidthd -l" for a list of
# devices.
dev "eth0"
###################################################
# Options that don't usually get changed
# An interval is 2.5 minutes, this is how many
# intervals to skip before doing a graphing run
skip_intervals 0
# Graph cutoff is how many k must be transfered by an
# ip before we bother to graph it
graph_cutoff 1024
#Put interface in promiscuous mode to score to traffic
#that may not be routing through the host machine.
promiscuous true
#Log data to cdf file htdocs/log.cdf
output_cdf true
#Read back the cdf file on startup
recover_cdf true
#Libpcap format filter string used to control what bandwidthd see's
#Please always include "ip" in the string to avoid strange problems
#filter "ip"
#Draw Graphs - This default to true to graph the traffic bandwidthd is recording
#Usually set this to false if you only want cdf output or
#you are using the database output option. Bandwidthd will use very little
#ram and cpu if this is set to false.
graph true
#Set META REFRESH seconds (default 150, use 0 to disable).
meta_refresh 150
####################################################
# Bandwidthd.conf
#
# Commented out options are here to provide
# documentation and represent defaults
# Subnets to collect statistics on. Traffic that
# matches none of these subnets will be ignored.
# Syntax is either IP Subnet Mask or CIDR
subnet 192.168.1.0/24
# Device to listen on
# Bandwidthd listens on the first device it detects
# by default. Run "bandwidthd -l" for a list of
# devices.
#dev "eth0"
###################################################
# Options that don't usually get changed
# An interval is 2.5 minutes, this is how many
# intervals to skip before doing a graphing run
#skip_intervals 0
# Graph cutoff is how many k must be transfered by an
# ip before we bother to graph it
#graph_cutoff 1024
#Put interface in promiscuous mode to score to traffic
#that may not be routing through the host machine.
#promiscuous true
#Log data to cdf file htdocs/log.cdf
output_cdf true
#Read back the cdf file on startup
recover_cdf true
#Libpcap format filter string used to control what bandwidthd see's
#Please always include "ip" in the string to avoid strange problems
#filter "ip"
#Draw Graphs - This default to true to graph the traffic bandwidthd is recording
#Usually set this to false if you only want cdf output or
#you are using the database output option. Bandwidthd will use very little
#ram and cpu if this is set to false.
#graph true
#Set META REFRESH seconds (default 150, use 0 to disable).
#meta_refresh 150
Maxwell escreveu:Obrigado pela força.
Desculpe sobre as bibliotecas imaginei que no bfw 2.31.10 tivesse.
Removi o badwindth e instalei as bibliotecas, reiniciei, instalei novamente bandwidth e coloquei as configurações que foi sugerida, backup, reiniciei novamente e agora estou tentando acessar para visualizar o trafego, digito no browser http://192.168.0.254:8186/ e me aparece isso
Index of /
mode links bytes last-changed name
dr-x 2 1024 Oct 15 18:12 ./
dr-x 4 1024 Oct 15 18:12 ../
-r-- 1 1649 Oct 22 16:09 legend.gif
-r-- 1 6989 Oct 22 16:09 logo.gif
O que seria?
/etc/rc.d/pkgs/rc.bandwidthd
Maxwell escreveu:Agora está ok.
Mas tive um problema com os cookies do firefox em minha máquina foi limpar que funcionou.
Obrigado.
reginaldo escreveu:Daniel, esta é uma Tradução para o Português:
Português ****************************************************************************************************************
bandwidthd.tgz - Monitore a Banda de sua rede através do bandwidth.
Descrição
BandwidthD examina a utilização de Redes e Sub-Redes por TCP/IP e cria arquivos HTML com gráficos para mostrar o uso. As análises são efetuadas individualmente por cada IP, e por padrão mostra a utilização através de períodos de 2, 8, 40 e 400 dias. Além disso, cada endereço IP pode ser logado em intervalos de 3,3 minutos, 10 minutos, 1 hora ou 12 horas em formato cdf. O tráfego HTTP, TCP, UDP, ICMP, VPN, e P2P são exibidos por diferentes cores.
Instruções de Instalação:
1 - Você precisa ter a 2ª partição para utilizar este add-on. A 2ª partição é criada quando o BFW é instalado, o instalador
BFW pede-lhe para criar uma segunda partição no disco rígido.
2 - A instalação padrão.
Instruções de Uso:
1 - Uma vez instalado, um novo elemento chamado Bandwidthd aparecerá no menu principal do WebAdmin do BFW.
2 - O servidor da web Bandwidthd ouve os pedidos em por padrão em $LOCAL_IPADDR: 8186. Você pode mudar a porta de trabalho através dos arquivos de configuração do Bandwidthd.
3 - Você precisa modificar arquivo de configuração Bandwidthd às suas necessidades.
4 - Você pode mudar o arquivo de configuração Bandwidthd apartir do WebAdmin.
5 - Há Necessidade de se fazer backup do seu sistema toda vez que fizer uma alteração na configuração do Bandwidthd.
6 - Há Necessidade de se fazer REBOOT no seu sistema para a aplicação das mudanças na configuração Bandwidthd
7 - Para ver a página de estatísticas do Bandwidthd, aponte no seu navegador para $LOCAL_IPADDR: 8186, como por exemplo: http://192.168.0.1:8186
Se você achar que este add-on é útil para você, por favor, diga obrigado, e considere a hipótese de fazer uma doação para o projeto do BrasilFW - Firewall e Roteador. Entre em contato com um dos moderadores do site para descobrir como você pode fazer uma doação
manauara escreveu:Hola Carvenicola,
tudo bien? Gracias por me indicar este post. Mi configuraciones:
BFW:
add-ons:
SQUID
SARG
RDD2STATS
ZBEEP
Bandwithd
192.168.10.0/24
10.10.10.0/24
Pero so mostra lo trafico ICMP. Ya consultei el forum pero no tengo sucesso.
ps: perdoe mi portunhol... he he he..
Evandro escreveu:Boa noite!!
tentei baixar por aqui e não consegui:
http://www.brazilfw.com.br/forum/viewtopic.php?f=15&t=65408&st=0&sk=t&sd=a&start=80#p149179, alguem mais teve este problema?
Cavernicola escreveu:Para descargar, aquí: http://www.brazilfw.com.br/forum/viewtopic.php?f=68&p=153826#p153826
To download, here: http://www.brazilfw.com.br/forum/viewtopic.php?f=68&p=153826#p153826
Para fazer o download, aqui: http://www.brazilfw.com.br/forum/viewtopic.php?f=68&p=153826#p153826
reginaldo escreveu:Daniel, O links citados estão dando como inexistente (Não Existe)
gamba47 escreveu:reginaldo escreveu:Daniel, O links citados estão dando como inexistente (Não Existe)
Solucionado, gracias Reginaldo.
gamba47
IceMan - Brazil escreveu:Ápos reiniciar o BFW se perde o histórico.
Qual comando devo colocar no Cron para que ele faça backup ?
Google translate:
Después de reiniciar el BFW si pierde su historia.
¿Qué debo escribir en el comando Cron para hacer copia de seguridad?
#Log data to cdf file htdocs/log.cdf
#output_cdf true
#Read back the cdf file on startup
#recover_cdf true
stalker escreveu:efectivamente esa es la solucion....yo lo uso asi y me va muy bien
- Código: Selecionar todos
#Log data to cdf file htdocs/log.cdf
#output_cdf true
#Read back the cdf file on startup
#recover_cdf true
Cavernicola escreveu:stalker escreveu:efectivamente esa es la solucion....yo lo uso asi y me va muy bien
- Código: Selecionar todos
#Log data to cdf file htdocs/log.cdf
#output_cdf true
#Read back the cdf file on startup
#recover_cdf true
Gracias por confirmarlo stalker, dime, el inicio del sistema no es muy lento con esa directiva?
kc0idi escreveu:I noticed in the screen shots of Bandwidthd on souceforge the associated names were displayed with the IP address. Is there a way to have names displayed with this add-on? Does anyone have a fix?
kc0idi escreveu:I noticed in the screen shots of Bandwidthd on souceforge the associated names were displayed with the IP address. Is there a way to have names displayed with this add-on? Does anyone have a fix?
kc0idi escreveu:I thought my problem was solved but it is not. Bandwidthd gets to a total of 256.6M and then stops updating. I'm using the default settings.
Usuários navegando neste fórum: Nenhum usuário registrado e 2 visitantes