O projeto original é este: http://smartmontools.sourceforge.net/
Não quero colocar o resultado do relatório completo porque é muita informação. Pensei em fazer alguma coisa baseado nisto:
Aqui está o resultado do relatório completo. Alguma informação que consta aqui deveria estar no resumo?
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP0411N
Serial Number: S01JJ20XC27658
Firmware Version: TW100-11
User Capacity: 40,060,403,712 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Fri Jun 13 16:16:01 2008 EST
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 900) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 15) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 1
3 Spin_Up_Time 0x0007 075 064 000 Pre-fail Always - 4672
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 627
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 643540
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 382
194 Temperature_Celsius 0x0022 160 085 000 Old_age Always - 26
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 12205146
196 Reallocated_Event_Count 0x0012 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail Offline - 0
199 UDMA_CRC_Error_Count 0x000b 100 100 051 Pre-fail Always - 45
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 1
SMART Error Log Version: 1
Warning: ATA error count 20224 inconsistent with error log pointer 5
ATA Error Count: 20224 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 20224 occurred at disk power-on lifetime: 5358 hours (223 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 c2 4f e0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 c2 4f e0 00 3d+22:01:43.313 SMART RETURN STATUS
ec 00 00 f2 01 d2 e0 00 3d+22:01:43.250 IDENTIFY DEVICE
ec 03 44 00 00 10 e0 00 3d+20:18:38.625 IDENTIFY DEVICE
ef 03 44 00 00 10 e0 00 3d+20:18:38.563 SET FEATURES [Set transfer mode]
ef 03 44 00 00 10 e0 00 3d+20:18:38.563 SET FEATURES [Set transfer mode]
Error 20223 occurred at disk power-on lifetime: 1937 hours (80 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 00 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 00 00 00 e0 00 05:23:06.375 READ DMA
Error 20222 occurred at disk power-on lifetime: 1937 hours (80 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 67 85 e6 e1 Error: ICRC, ABRT 8 sectors at LBA = 0x01e68567 = 31884647
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 67 85 e6 e1 00 05:23:06.375 READ DMA
c8 00 08 67 85 e6 e1 00 05:23:06.375 READ DMA
c8 00 08 37 81 8d e1 00 05:23:06.375 READ DMA
c8 00 08 37 81 e0 e1 00 05:23:06.375 READ DMA
c8 00 08 27 81 e0 e1 00 05:23:06.375 READ DMA
Error 20221 occurred at disk power-on lifetime: 1921 hours (80 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 2f e9 4e e0 Error: ICRC, ABRT 8 sectors at LBA = 0x004ee92f = 5171503
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 2f e9 4e e0 00 06:05:28.750 READ DMA
Error 20220 occurred at disk power-on lifetime: 1921 hours (80 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 d7 ea 99 e0 Error: ICRC, ABRT 8 sectors at LBA = 0x0099ead7 = 10087127
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d7 ea 99 e0 00 06:05:28.750 READ DMA
c8 00 08 d7 ea 99 e0 00 06:05:28.750 READ DMA
c8 00 08 57 eb 31 e0 00 06:05:28.750 READ DMA
c8 00 08 7f ea 99 e0 00 06:05:28.750 READ DMA
c8 00 3f 59 09 ec e3 00 06:05:28.688 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5360 -
Device does not support Selective Self Tests/Logging