Smartmon Tools - Saúde do HD [INACTIVE]

Here we discuss compilation and how to build an addon for BFW.

Smartmon Tools - Saúde do HD

Mensagempor Bender » Sex Jun 13, 2008 5:14 pm

Estou criando uma interface para o Webadmin para monitorar a saúde do HD.

O projeto original é este: http://smartmontools.sourceforge.net/

Não quero colocar o resultado do relatório completo porque é muita informação. Pensei em fazer alguma coisa baseado nisto:
Imagem

Aqui está o resultado do relatório completo. Alguma informação que consta aqui deveria estar no resumo?
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP0411N
Serial Number: S01JJ20XC27658
Firmware Version: TW100-11
User Capacity: 40,060,403,712 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Fri Jun 13 16:16:01 2008 EST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 900) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 15) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 1
3 Spin_Up_Time 0x0007 075 064 000 Pre-fail Always - 4672
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 627
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 643540
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 382
194 Temperature_Celsius 0x0022 160 085 000 Old_age Always - 26
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 12205146
196 Reallocated_Event_Count 0x0012 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail Offline - 0
199 UDMA_CRC_Error_Count 0x000b 100 100 051 Pre-fail Always - 45
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 1

SMART Error Log Version: 1
Warning: ATA error count 20224 inconsistent with error log pointer 5

ATA Error Count: 20224 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 20224 occurred at disk power-on lifetime: 5358 hours (223 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 c2 4f e0 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 c2 4f e0 00 3d+22:01:43.313 SMART RETURN STATUS
ec 00 00 f2 01 d2 e0 00 3d+22:01:43.250 IDENTIFY DEVICE
ec 03 44 00 00 10 e0 00 3d+20:18:38.625 IDENTIFY DEVICE
ef 03 44 00 00 10 e0 00 3d+20:18:38.563 SET FEATURES [Set transfer mode]
ef 03 44 00 00 10 e0 00 3d+20:18:38.563 SET FEATURES [Set transfer mode]

Error 20223 occurred at disk power-on lifetime: 1937 hours (80 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 00 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 00 00 00 e0 00 05:23:06.375 READ DMA

Error 20222 occurred at disk power-on lifetime: 1937 hours (80 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 67 85 e6 e1 Error: ICRC, ABRT 8 sectors at LBA = 0x01e68567 = 31884647

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 67 85 e6 e1 00 05:23:06.375 READ DMA
c8 00 08 67 85 e6 e1 00 05:23:06.375 READ DMA
c8 00 08 37 81 8d e1 00 05:23:06.375 READ DMA
c8 00 08 37 81 e0 e1 00 05:23:06.375 READ DMA
c8 00 08 27 81 e0 e1 00 05:23:06.375 READ DMA

Error 20221 occurred at disk power-on lifetime: 1921 hours (80 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 2f e9 4e e0 Error: ICRC, ABRT 8 sectors at LBA = 0x004ee92f = 5171503

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 2f e9 4e e0 00 06:05:28.750 READ DMA

Error 20220 occurred at disk power-on lifetime: 1921 hours (80 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 d7 ea 99 e0 Error: ICRC, ABRT 8 sectors at LBA = 0x0099ead7 = 10087127

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d7 ea 99 e0 00 06:05:28.750 READ DMA
c8 00 08 d7 ea 99 e0 00 06:05:28.750 READ DMA
c8 00 08 57 eb 31 e0 00 06:05:28.750 READ DMA
c8 00 08 7f ea 99 e0 00 06:05:28.750 READ DMA
c8 00 3f 59 09 ec e3 00 06:05:28.688 READ DMA

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5360 -

Device does not support Selective Self Tests/Logging
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Just » Seg Jun 16, 2008 4:21 pm

Está Show Bender! Você vai colocar o Helth Status também?

Ah, mas para funcionar a mobo e o HD devem ter compatibilidade com o SMART, correto?
Just
 

Re: Smartmon Tools - Saúde do HD

Mensagempor reginaldo » Seg Jun 16, 2008 4:25 pm

:aplause: :aplause: :aplause: :aplause:

So uma curiosidade. E o restante da capacidade do HD ?
Contribua para que o Projeto BFW permaneça no ar, Doe Click aqui
Contribua com o reginaldo, Doe, favor enviar e-mail para reginaldo@brazilfw.com.br
-----------------------------------------------------------------------------------------------------
"Disciplina é liberdade. Compaixão é fortaleza. Ter bondade é ter coragem" (Há Tempos [Dado Villa-Lobos/Renato Russo/Marcelo Bonfá])
Avatar do usuário
reginaldo
BFW Mediator
BFW Documenter
BFW Manager
BFW 3.x Update
 
Mensagens: 12686
Registrado em: Sáb Ago 27, 2005 12:10 pm
Localização: Rio de Janeiro - RJ
BrazilFW Box: Máquina Física
CPU: Intel Core i3 Model 530
Memória: 8.00 GiB / 2 Links
BFW 3.0.262 64 bits
Serviços Ativos: Control MAC, QOS
Addons: EBackup, EPM e Squid 3.5.x

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Seg Jun 16, 2008 4:48 pm

Você vai colocar o Helth Status também?

Sim, só não descobri ainda onde consigo a infomação.

Ah, mas para funcionar a mobo e o HD devem ter compatibilidade com o SMART, correto?

Acho que sim. :D Não testei em placas antigas ainda.

So uma curiosidade. E o restante da capacidade do HD ?

Eu estava com muita pressa pra colocar o firewall no ar, então criei o /partiton com 10 pra ganhar tempo na instalação. Nem sei se ganhei tanto tempo assim.
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Seg Jun 16, 2008 5:08 pm

Imagem

Acrescentei a temperatura do HD. Quais seriam as temperaturas pra mudar de cor a barrinha???
Verde até X, onde X é a temperatura máxima aceitável.
Amarelo de X até Y. Alguma coisa tá errada.
Vermelho acima de Y, pode colocar outro que esse foi pro saco!!

Alguém pode instalar o addon e postar o resultado completo do teste para eu poder comparar?
http://www.brazilfw.com.br/users/Bender/addons/smart/smart.tgz
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Just » Seg Jun 16, 2008 7:34 pm

Realmente tem que ter suporte a SMART. Aqui não rolou, mas esse é um ótimo Addon para monitorar o HD! :aplause:
Just
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Just » Seg Jun 16, 2008 7:55 pm

O mais legal é que acabei de descobrir que minha Placa mãe e HD tem suporte ao SMART. Acabei de habilitar aqui...

A placa mãe é uma PCChips M748MR e o HD é um Seagate de 10Gb, mas o Addon não funcionou legal, deu uma série de erros:

Código: Selecionar todos
Device Model....: ST310212A
User Capacity...: 10,242,892,800 bytes (10002Mb)
df: /dev/hda1: can't find mount point.
smart.cgi: smart.cgi: 44: Syntax error:  100 - 
  hda1..........:  blue (40Mb)
  hda2..........:  4% 96%                                             (9952Mb)
Serial Number...: 5EG0T1P2
Firmware Version: 3.02
ATA Version is..: 5
ATA Standard is.: Exact ATA specification draft version not indicated
Temperature (°C):  green
hdparm Results..:
grep: /tmp/hdt.tmp: No such file or directory
grep: /tmp/hdt.tmp: No such file or directory
 :
grep: /tmp/hdT.tmp: No such file or directory
grep: /tmp/hdT.tmp: No such file or directory
 .......:

-----------------------------------------------------------
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate U10 family
Device Model:     ST310212A
Serial Number:    5EG0T1P2
Firmware Version: 3.02
User Capacity:    10,242,892,800 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Jun 16 19:54:44 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Warning! SMART Attribute Data Structure error: invalid SMART checksum.
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection:        (   0) seconds.
Offline data collection
capabilities:           (0x00)    Offline data collection not supported.
SMART capabilities:            (0x0000)   Automatic saving of SMART data               is not implemented.
Error logging capability:        (0x00)   Error logging NOT supported.
               No General Purpose Logging support.

SMART Attributes Data Structure revision number: 56997
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
165 Unknown_Attribute       0xa5de   222   165   000    Old_age   Always       -       182375684154846
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  0 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
165 Unknown_Attribute       0xa5de   222   165   002    Old_age   Always       -       182375684154846
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  1 Raw_Read_Error_Rate     <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
165 Unknown_Attribute       0xa5de   222   165   000    Old_age   Always       -       182375684154846
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  0 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
165 Unknown_Attribute       0xa5de   222   165   000    Old_age   Always       -       182375684154846
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  0 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
165 Unknown_Attribute       0xa5de   222   165   000    Old_age   Always       -       18548451616222
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  1 Raw_Read_Error_Rate     <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
  1 Raw_Read_Error_Rate     0x0008   077   070   000    Old_age   Offline      -       145633482
  3 Spin_Up_Time            0x0006   098   098   000    Old_age   Always       -       0
  4 Start_Stop_Count        0x0013   098   098   020    Pre-fail  Always       -       2388
  5 Reallocated_Sector_Ct   0x0013   099   099   036    Pre-fail  Always       -       67
  7 Seek_Error_Rate         0x0009   069   058   030    Pre-fail  Offline      -       34420527514
  9 Power_On_Hours          0x0012   089   089   000    Old_age   Always       -       10383
 10 Spin_Retry_Count        0x0013   100   100   090    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0013   096   096   000    Pre-fail  Always       -       4412
197 Current_Pending_Sector  0x0030   100   100   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

Warning: device does not support Error Logging
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 0
No Errors Logged

Warning: device does not support Self Test Logging
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 134
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging


Ah, meu HD não tem Bad Blocks.
Just
 

Re: Smartmon Tools - Saúde do HD

Mensagempor reginaldo » Seg Jun 16, 2008 8:45 pm

Taí o meu teste.

Obrigado pelo Addon dancing dancing dancing dancing :aplause: :aplause: :aplause: :o! :o!

Código: Selecionar todos
Device Model....: ST310211A
User Capacity...: 10,005,037,056 bytes (9770Mb)
df: /dev/hda1: can't find mount point.
smart.cgi: smart.cgi: 44: Syntax error:  100 - 
  hda1..........:  blue (192Mb)
  hda2..........:  16%     84%                                       (9566Mb)
Serial Number...: 5DB0CE8M
Firmware Version: 3.54
ATA Version is..: 4
ATA Standard is.: Exact ATA specification draft version not indicated
Temperature (°C):  35°             
hdparm Results..:
grep: /tmp/hdt.tmp: No such file or directory
grep: /tmp/hdt.tmp: No such file or directory
 :
grep: /tmp/hdT.tmp: No such file or directory
grep: /tmp/hdT.tmp: No such file or directory
 .......:

-----------------------------------------------------------
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate U Series 5 family
Device Model:     ST310211A
Serial Number:    5DB0CE8M
Firmware Version: 3.54
User Capacity:    10,005,037,056 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   4
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Jun 16 20:43:37 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:        ( 422) seconds.
Offline data collection
capabilities:           (0x1b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               No Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               No General Purpose Logging support.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (  13) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000e   081   060   025    Old_age   Always       -       194347815
  3 Spin_Up_Time            0x0002   073   071   000    Old_age   Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1352
  5 Reallocated_Sector_Ct   0x0032   100   100   036    Old_age   Always       -       1
  7 Seek_Error_Rate         0x000e   081   060   030    Old_age   Always       -       164366542
  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       9258
 10 Spin_Retry_Count        0x0012   100   100   097    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1633
194 Temperature_Celsius     0x0022   035   054   000    Old_age   Always       -       35
195 Hardware_ECC_Recovered  0x001a   074   063   000    Old_age   Always       -       36807195
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       72
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       72
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   100   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 283 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 283 occurred at disk power-on lifetime: 6048 hours (252 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0f 7a 78 68 e0  Error: UNC at LBA = 0x0068787a = 6846586

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c4 00 10 79 78 68 e0 00      00:07:26.971  READ MULTIPLE
  c4 00 10 79 6d 67 e0 00      00:07:26.960  READ MULTIPLE
  c4 00 10 c9 9b 65 e0 00      00:07:26.952  READ MULTIPLE
  c4 00 10 39 ca 62 e0 00      00:07:26.939  READ MULTIPLE
  c4 00 10 c9 46 60 e0 00      00:07:26.928  READ MULTIPLE

Error 282 occurred at disk power-on lifetime: 6048 hours (252 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0f 7a 78 68 e0  Error: UNC at LBA = 0x0068787a = 6846586

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c4 00 10 79 78 68 e0 00      00:07:22.320  READ MULTIPLE
  c4 00 10 79 6d 67 e0 00      00:07:22.308  READ MULTIPLE
  c4 00 10 c9 9b 65 e0 00      00:07:22.301  READ MULTIPLE
  c4 00 10 39 ca 62 e0 00      00:07:22.284  READ MULTIPLE
  c4 00 10 c9 46 60 e0 00      00:07:22.282  READ MULTIPLE

Error 281 occurred at disk power-on lifetime: 6048 hours (252 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 80 78 68 e0  Error: UNC at LBA = 0x00687880 = 6846592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c4 00 01 80 78 68 e0 00      00:00:17.226  READ MULTIPLE
  c6 00 10 01 00 00 ef 00      00:00:17.226  SET MULTIPLE MODE
  91 00 3f 01 00 00 ef 00      00:00:17.226  INITIALIZE DEVICE PARAMETERS [OBS-6]
  10 00 01 01 00 00 e1 00      00:00:17.226  RECALIBRATE [OBS-4]
  00 00 00 00 00 00 00 04      00:00:17.219  NOP [Abort queued commands]

Error 280 occurred at disk power-on lifetime: 6048 hours (252 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 80 78 68 e0  Error: UNC at LBA = 0x00687880 = 6846592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c4 00 01 80 78 68 e0 00      00:00:12.608  READ MULTIPLE
  c4 00 01 7f 78 68 e0 00      00:00:12.608  READ MULTIPLE
  c4 00 01 7e 78 68 e0 00      00:00:12.608  READ MULTIPLE
  c4 00 01 7d 78 68 e0 00      00:00:12.608  READ MULTIPLE
  c4 00 01 7c 78 68 e0 00      00:00:12.608  READ MULTIPLE

Error 279 occurred at disk power-on lifetime: 6048 hours (252 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 80 78 68 e0  Error: UNC at LBA = 0x00687880 = 6846592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c4 00 01 80 78 68 e0 00      00:01:02.852  READ MULTIPLE
  c6 00 10 01 00 00 ef 00      00:01:02.852  SET MULTIPLE MODE
  91 00 3f 01 00 00 ef 00      00:01:02.852  INITIALIZE DEVICE PARAMETERS [OBS-6]
  10 00 01 01 00 00 e1 00      00:01:02.852  RECALIBRATE [OBS-4]
  00 00 00 00 00 00 00 04      00:01:02.845  NOP [Abort queued commands]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging
Contribua para que o Projeto BFW permaneça no ar, Doe Click aqui
Contribua com o reginaldo, Doe, favor enviar e-mail para reginaldo@brazilfw.com.br
-----------------------------------------------------------------------------------------------------
"Disciplina é liberdade. Compaixão é fortaleza. Ter bondade é ter coragem" (Há Tempos [Dado Villa-Lobos/Renato Russo/Marcelo Bonfá])
Avatar do usuário
reginaldo
BFW Mediator
BFW Documenter
BFW Manager
BFW 3.x Update
 
Mensagens: 12686
Registrado em: Sáb Ago 27, 2005 12:10 pm
Localização: Rio de Janeiro - RJ
BrazilFW Box: Máquina Física
CPU: Intel Core i3 Model 530
Memória: 8.00 GiB / 2 Links
BFW 3.0.262 64 bits
Serviços Ativos: Control MAC, QOS
Addons: EBackup, EPM e Squid 3.5.x

Re: Smartmon Tools - Saúde do HD

Mensagempor luapufo » Ter Jun 17, 2008 9:28 am

olha que apareceu no meu:

Device Model....: Maxtor 6E040L0
User Capacity...: 41,110,142,976 bytes (40146Mb)
df: /dev/hda1: can't find mount point.
smart.cgi: smart.cgi: 44: Syntax error: 100 -
hda1..........: blue (610Mb) ( Aqui era para aparecer a barrinha Azul, mais apareceu Blue )
hda2..........: 2% 98% (1044Mb)
Serial Number...: E17JLGCN
Firmware Version: NAR61HA0
ATA Version is..: 7
ATA Standard is.: ATA/ATAPI-7 T13 1532D revision 0
Temperature (°C): 32°
hdparm Results..:
grep: /tmp/hdt.tmp: No such file or directory
grep: /tmp/hdt.tmp: No such file or directory
:
grep: /tmp/hdT.tmp: No such file or directory
grep: /tmp/hdT.tmp: No such file or directory
.......:

-----------------------------------------------------------
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 8 family
Device Model: Maxtor 6E040L0
Serial Number: E17JLGCN
Firmware Version: NAR61HA0
User Capacity: 41,110,142,976 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Tue Jun 17 09:24:18 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1021) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 17) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 227 227 063 Pre-fail Always - 3070
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 28
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 250 240 187 Pre-fail Always - 50577
9 Power_On_Minutes 0x0032 242 242 000 Old_age Always - 766h+57m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 252 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 250 250 000 Old_age Always - 1457
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 449
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 32
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 7842
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 80
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 188 186 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0

SMART Error Log Version: 1
Warning: ATA error count 39 inconsistent with error log pointer 5

ATA Error Count: 39 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 39 occurred at disk power-on lifetime: 640 hours (26 days + 16 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 e7 07 8f e3 Error: UNC 7 sectors at LBA = 0x038f07e7 = 59705319

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 e7 07 8f e3 00 00:20:44.432 READ DMA
ca 00 08 af 7a 8c e3 00 00:20:44.416 WRITE DMA
ca 00 30 37 86 05 e3 00 00:20:44.416 WRITE DMA
ca 00 18 47 9f 5f e0 00 00:20:44.416 WRITE DMA
ca 00 80 f7 f0 41 e0 00 00:20:44.416 WRITE DMA

Error 38 occurred at disk power-on lifetime: 640 hours (26 days + 16 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 e7 07 8f e3 Error: UNC 7 sectors at LBA = 0x038f07e7 = 59705319

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 e7 07 8f e3 00 00:20:42.112 READ DMA
ca 00 08 47 00 5e e0 00 00:20:42.096 WRITE DMA
ca 00 80 27 eb 41 e0 00 00:20:42.096 WRITE DMA
ca 00 80 a7 ea 41 e0 00 00:20:42.096 WRITE DMA
c8 00 08 e7 07 8f e3 00 00:20:39.824 READ DMA

Error 37 occurred at disk power-on lifetime: 640 hours (26 days + 16 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 e7 07 8f e3 Error: UNC 7 sectors at LBA = 0x038f07e7 = 59705319

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 e7 07 8f e3 00 00:20:39.824 READ DMA
ca 00 08 3f 9f 5f e0 00 00:20:39.808 WRITE DMA
ca 00 80 27 ea 41 e0 00 00:20:39.808 WRITE DMA
ca 00 80 a7 e9 41 e0 00 00:20:39.808 WRITE DMA
ca 00 08 e7 e0 08 e0 00 00:20:39.776 WRITE DMA

Error 36 occurred at disk power-on lifetime: 640 hours (26 days + 16 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 e7 07 8f e3 Error: UNC 7 sectors at LBA = 0x038f07e7 = 59705319

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 e7 07 8f e3 00 00:20:37.504 READ DMA
c8 00 80 af 02 8f e3 00 00:20:37.504 READ DMA
c8 00 80 2f 02 8f e3 00 00:20:37.504 READ DMA
c8 00 80 af 01 8f e3 00 00:20:37.504 READ DMA
c8 00 80 2f 01 8f e3 00 00:20:37.504 READ DMA

Error 35 occurred at disk power-on lifetime: 640 hours (26 days + 16 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 e7 07 8f e3 Error: UNC 7 sectors at LBA = 0x038f07e7 = 59705319

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 e7 07 8f e3 00 00:20:34.624 READ DMA
ca 00 10 87 7d 8c e3 00 00:20:34.608 WRITE DMA
ca 00 58 4f 4a 68 e3 00 00:20:34.608 WRITE DMA
ca 00 08 5e a0 72 e2 00 00:20:34.608 WRITE DMA
ca 00 10 17 9f 5f e0 00 00:20:34.608 WRITE DMA

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
luapufo
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Ter Jun 17, 2008 9:55 am

Atualizado.
Imagem

Não sei se meu HD tá louco ou eu errei no Power On Time. Meu disco tem 74 anos. \`´/
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Ter Jun 17, 2008 10:55 am

Atualizado. O deamon smart não estava na incialização, por isso o relatório incompleto.
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Just » Ter Jun 17, 2008 12:13 pm

Opa! Agora sim dancing

Só a temperatura que não seu direito, ficou apenas escrito green. Acho que esse Power ON é o tempo total de utilização do HD, no meu está em: Power On Time...: 1 years/2 months/7 days/3 hours (10399 hours)

Mas 74 anos é meio estranho. :lol:
Just
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Marcelo - Brazil » Qui Jun 19, 2008 8:38 pm

Bender !!!!

"Dú cacete" este seu add-on ! Putz ! impressindivel, inclusive na 3.0 !

Parabéns, tu é demais !!! :o! :aplause: dancing

O "green" da temperatura do Just é o mesmo que o meu, veja na imagem abaixo:

Imagem

No relatório escrito, bem no final tem alguns erros sendo acusado:

Código: Selecionar todos
SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Device does not support Selective Self Tests/Logging


Mas isso se deve mais ao meu HD do que ao add-on, com certeza !

Parabens de novo.
BFW não é meu hobby, é meu router !
Não dou suporte.

"Nem sim, nem não, mas muito pelo contrário, não sou contra nem à favor,
porque em matéria de certas coisas o mais importante é o principalmente,
aliás inclusive, não resta a menor dúvida".
De algum politico brasileiro...
Avatar do usuário
Marcelo - Brazil
BFW Founder
BFW Manager
BFW Beneméritos
 
Mensagens: 3187
Registrado em: Qua Ago 24, 2005 10:40 pm
Localização: Campinas - São Paulo
BrazilFW Box: Hp Proliant ML30 Gen 9, Intel® Xeon® E3-1200 v5 3,0 Ghz, 8 Gb ram DDR4, 1 Tb HD, Links 120x12 mb/s cabo + 100x100 mb/s fibra. Addon: Unifi, 50 clientes lan + 50 cliente wireless.

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Sex Jun 20, 2008 8:02 am

Just e Marcelo,

No relatório relatório tem um item que se refere a temperatura. Aqui tá aparecendo assim:
194 Temperature_Celsius 0x0022 160 085 000 Old_age Always - 26

Como estão no seus?
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Just » Sex Jun 20, 2008 10:19 am

Aqui não tem isso. Esse é o "resto" do relatório apresentado:

Código: Selecionar todos
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate U10 family
Device Model:     ST310212A
Serial Number:    5EG0T1P2
Firmware Version: 3.02
User Capacity:    10,242,892,800 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Jun 20 10:20:13 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Warning! SMART Attribute Data Structure error: invalid SMART checksum.
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection:        (   0) seconds.
Offline data collection
capabilities:           (0x00)    Offline data collection not supported.
SMART capabilities:            (0x0000)   Automatic saving of SMART data               is not implemented.
Error logging capability:        (0x00)   Error logging NOT supported.
               No General Purpose Logging support.

SMART Attributes Data Structure revision number: 56997
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
165 Unknown_Attribute       0xa5de   222   165   000    Old_age   Always       -       182375684154846
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  0 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
165 Unknown_Attribute       0xa5de   222   165   002    Old_age   Always       -       182375684154846
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  3 Spin_Up_Time            <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
165 Unknown_Attribute       0xa5de   222   165   000    Old_age   Always       -       182375684154846
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  0 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
165 Unknown_Attribute       0xa5de   222   165   000    Old_age   Always       -       182375684154846
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  0 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
165 Unknown_Attribute       0xa5de   222   165   000    Old_age   Always       -       18548451616222
165 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  1 Raw_Read_Error_Rate     <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
  1 Raw_Read_Error_Rate     0x0008   077   070   000    Old_age   Offline      -       145633482
  3 Spin_Up_Time            0x0006   098   098   000    Old_age   Always       -       0
  4 Start_Stop_Count        0x0013   098   098   020    Pre-fail  Always       -       2389
  5 Reallocated_Sector_Ct   0x0013   099   099   036    Pre-fail  Always       -       67
  7 Seek_Error_Rate         0x0009   069   058   030    Pre-fail  Offline      -       34420753331
  9 Power_On_Hours          0x0012   089   089   000    Old_age   Always       -       10467
 10 Spin_Retry_Count        0x0013   100   100   090    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0013   096   096   000    Pre-fail  Always       -       4413
197 Current_Pending_Sector  0x0030   100   100   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

Warning: device does not support Error Logging
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 0
No Errors Logged

Warning: device does not support Self Test Logging
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 134
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging


Abs!
Just
 

Re: Smartmon Tools - Saúde do HD

Mensagempor reginaldo » Sex Jun 20, 2008 10:35 am

Meu teste com a revisão do pacote:

Detalhe: O meu saiu 34 anos.

Imagem

restante do relatório:

Código: Selecionar todos
-----------------------------------------------------------
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     Maxtor 90432D3
Serial Number:    K31883NA
Firmware Version: WAS8283C
User Capacity:    4,321,787,904 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   4
ATA Standard is:  ATA/ATAPI-4 T13 1153D revision 17
Local Time is:    Fri Jun 20 10:27:39 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Total time to complete Offline
data collection:        (   0) seconds.
Offline data collection
capabilities:           (0x0f) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Abort Offline collection upon new
               command.
               Offline surface scan supported.
               No Self-test supported.
               No Conveyance Self-test supported.
               No Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x00)   Error logging NOT supported.
               No General Purpose Logging support.

SMART Attributes Data Structure revision number: 6
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   253   252   000    Pre-fail  Always       -       8590404636
  3 Spin_Up_Time            0x0027   229   228   063    Pre-fail  Always       -       67
  4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       3367
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  6 Read_Channel_Margin     0x0000   001   001   000    Old_age   Offline      -       1600
  7 Seek_Error_Rate         0x000b   253   253   000    Pre-fail  Always       -       83114
  8 Seek_Time_Performance   0x0027   253   239   187    Pre-fail  Always       -       158342559596144
  9 Power_On_Hours          0x0032   240   240   000    Old_age   Always       -       306790
 10 Spin_Retry_Count        0x002b   253   253   223    Pre-fail  Always       -       52
 11 Calibration_Retry_Count 0x002b   253   253   223    Pre-fail  Always       -       91
 12 Power_Cycle_Count       0x0032   250   250   000    Old_age   Always       -       1972
199 UDMA_CRC_Error_Count    0x0008   200   200   000    Old_age   Offline      -       6588

Warning: device does not support Error Logging
Error SMART Error Log Read failed: Input/output error
Smartctl: SMART Error Log Read Failed
Warning: device does not support Self Test Logging
Error SMART Error Self-Test Log Read failed: Input/output error
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging
Contribua para que o Projeto BFW permaneça no ar, Doe Click aqui
Contribua com o reginaldo, Doe, favor enviar e-mail para reginaldo@brazilfw.com.br
-----------------------------------------------------------------------------------------------------
"Disciplina é liberdade. Compaixão é fortaleza. Ter bondade é ter coragem" (Há Tempos [Dado Villa-Lobos/Renato Russo/Marcelo Bonfá])
Avatar do usuário
reginaldo
BFW Mediator
BFW Documenter
BFW Manager
BFW 3.x Update
 
Mensagens: 12686
Registrado em: Sáb Ago 27, 2005 12:10 pm
Localização: Rio de Janeiro - RJ
BrazilFW Box: Máquina Física
CPU: Intel Core i3 Model 530
Memória: 8.00 GiB / 2 Links
BFW 3.0.262 64 bits
Serviços Ativos: Control MAC, QOS
Addons: EBackup, EPM e Squid 3.5.x

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Sex Jun 20, 2008 10:51 am

Detalhe: O meu saiu 34 anos.

O meu por enquanto é o mais idoso, 74 anos!! \`´/ \`´/ \`´/ \`´/

Engraçado que em nenhum tem a temperatura.
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Infonetics » Sex Jun 20, 2008 3:08 pm

Mestres, boa tarde!

Segue abaixo meu relatório:

Device Model....: QUANTUM FIREBALLlct20 10
User Capacity...: 10,261,487,104 bytes (10020Mb)
hda1..........: 1% 99% (522Mb)
hda2..........: 17% 83% (9486Mb)
Serial Number...: 051112349183
Firmware Version: APL.0900
ATA Version is..: 5
ATA Standard is.: ATA/ATAPI-5 T13 1321D revision 1
Temperature (°C): green
Power On Time...: /6 months/8 days/13 hours (4591 hours)
hdparm Results..:
Timing buffered disk reads: 58 MB in 3.09 seconds = 18.77 MB/sec
Timing cached reads.......: 246 MB in 2.01 seconds = 122.39 MB/sec

-----------------------------------------------------------
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: QUANTUM FIREBALLlct20 10
Serial Number: 051112349183
Firmware Version: APL.0900
User Capacity: 10,261,487,104 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Fri Jun 20 15:01:55 2008 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 51) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 13) minutes.

SMART Attributes Data Structure revision number: 11
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 081 079 020 Pre-fail Always - 2434
4 Start_Stop_Count 0x0032 092 092 008 Old_age Always - 5418
5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0
9 Power_On_Hours 0x0012 093 093 001 Old_age Always - 4591
10 Spin_Retry_Count 0x0026 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 008 Old_age Always - 2953
13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1178
196 Reallocated_Event_Count 0x0010 100 253 020 Old_age Offline - 0
197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging


A temperatura não apareceu a barrinha verde...
Infonetics
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Marcos do Vale » Sex Jun 20, 2008 3:33 pm

Alguns HDs não possuem o recurso de sensor de temperatura.
Estes Quantum LCT (ahhhhggg!) é um deles.
Marcos do Vale
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Infonetics » Sex Jun 20, 2008 5:17 pm

Marcos do Vale escreveu:Alguns HDs não possuem o recurso de sensor de temperatura.
Estes Quantum LCT (ahhhhggg!) é um deles.


Vixi, depois desta expressão sobre o HD, trocá-lo-ei imediatamente... \`´/
Infonetics
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Marcelo - Brazil » Dom Jun 22, 2008 1:49 pm

L.C.T. = Low Cost Technology...

Tecnologia de baixo custo...argh ² !!!! :-x

Realmente servidor e com squid numa hd destas não é assim um "bom negócio" !
BFW não é meu hobby, é meu router !
Não dou suporte.

"Nem sim, nem não, mas muito pelo contrário, não sou contra nem à favor,
porque em matéria de certas coisas o mais importante é o principalmente,
aliás inclusive, não resta a menor dúvida".
De algum politico brasileiro...
Avatar do usuário
Marcelo - Brazil
BFW Founder
BFW Manager
BFW Beneméritos
 
Mensagens: 3187
Registrado em: Qua Ago 24, 2005 10:40 pm
Localização: Campinas - São Paulo
BrazilFW Box: Hp Proliant ML30 Gen 9, Intel® Xeon® E3-1200 v5 3,0 Ghz, 8 Gb ram DDR4, 1 Tb HD, Links 120x12 mb/s cabo + 100x100 mb/s fibra. Addon: Unifi, 50 clientes lan + 50 cliente wireless.

Re: Smartmon Tools - Saúde do HD

Mensagempor Marcelo - Brazil » Dom Jun 22, 2008 2:15 pm

Bender,
Documentação interessante sobre endereçamento ultra ata, pra vc ver -> http://www.seagate.com/support/disc/manuals/ata/u8pmb.pdf
Alias, é a documentação da minha HD.
Pergunta:
A interface gráfica mostra os dados, e a´pos op tracejaja, mostra novamente o relatório completo.
Aonde podemos editar isso ?
Digo, cortamos informações ou colocar outras neste CGI ?
BFW não é meu hobby, é meu router !
Não dou suporte.

"Nem sim, nem não, mas muito pelo contrário, não sou contra nem à favor,
porque em matéria de certas coisas o mais importante é o principalmente,
aliás inclusive, não resta a menor dúvida".
De algum politico brasileiro...
Avatar do usuário
Marcelo - Brazil
BFW Founder
BFW Manager
BFW Beneméritos
 
Mensagens: 3187
Registrado em: Qua Ago 24, 2005 10:40 pm
Localização: Campinas - São Paulo
BrazilFW Box: Hp Proliant ML30 Gen 9, Intel® Xeon® E3-1200 v5 3,0 Ghz, 8 Gb ram DDR4, 1 Tb HD, Links 120x12 mb/s cabo + 100x100 mb/s fibra. Addon: Unifi, 50 clientes lan + 50 cliente wireless.

Re: Smartmon Tools - Saúde do HD

Mensagempor Infonetics » Dom Jun 22, 2008 11:11 pm

Marcelo - Brazil escreveu:L.C.T. = Low Cost Technology...

Tecnologia de baixo custo...argh ² !!!! :-x

Realmente servidor e com squid numa hd destas não é assim um "bom negócio" !


Estou trocando amanhã por um Samsung IDE 80Gb...
Infonetics
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Seg Jun 23, 2008 8:15 am

Marcelo - Brazil escreveu:Bender,
Documentação interessante sobre endereçamento ultra ata, pra vc ver -> http://www.seagate.com/support/disc/manuals/ata/u8pmb.pdf
Alias, é a documentação da minha HD.
Pergunta:
A interface gráfica mostra os dados, e a´pos op tracejaja, mostra novamente o relatório completo.
Aonde podemos editar isso ?
Digo, cortamos informações ou colocar outras neste CGI ?


Minha idéia é deixar só o relatório sintético do início e colocar um botão para mostrar o resultado completo. A segunda parte da página na verdade é o resultado do comando smartctl -a /dev/hda. Deixe por enquanto para facilitar no desenvolvimento.
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Paulodias » Ter Jun 24, 2008 5:29 pm

É Bender parece que o seu hd é mesmo o HighLander.

Parabéns :aplause: :aplause: :aplause: Belo trabalho.

segue o que diagnosticou no meu.

Imagem


E o restante do Relatório.
=== START OF INFORMATION SECTION ===
Model Family: Seagate U Series 6 family
Device Model: ST340810A
Serial Number: 6FB1BZGJ
Firmware Version: 3.39
User Capacity: 40,020,664,320 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jun 24 17:24:19 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 420) seconds.
Offline data collection
capabilities: (0x1d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 42) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 063 054 025 Pre-fail Always - 60755050
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 427
5 Reallocated_Sector_Ct 0x0033 077 077 036 Pre-fail Always - 241
7 Seek_Error_Rate 0x000f 062 060 030 Pre-fail Always - 1633288
9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 10808
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 7
194 Temperature_Celsius 0x0022 037 047 000 Old_age Always - 37
195 Hardware_ECC_Recovered 0x001a 100 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 093 092 000 Old_age Always - 76
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 198 000 Old_age Always - 7
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 5964 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 5964 occurred at disk power-on lifetime: 10760 hours (448 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 39 cc 3a 30 e3 Error: UNC 57 sectors at LBA = 0x03303acc = 53492428

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 50 b5 3a 30 e3 00 00:00:00.996 READ DMA
c8 00 52 b3 3a 30 e3 00 00:00:20.525 READ DMA
c8 00 54 b1 3a 30 e3 00 00:00:21.118 READ DMA
c8 00 56 af 3a 30 e3 00 00:00:17.045 READ DMA
c8 00 58 ad 3a 30 e3 00 00:00:19.379 READ DMA

Error 5963 occurred at disk power-on lifetime: 10760 hours (448 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 39 cc 3a 30 e3 Error: UNC 57 sectors at LBA = 0x03303acc = 53492428

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 52 b3 3a 30 e3 00 00:00:00.326 READ DMA
c8 00 54 b1 3a 30 e3 00 00:00:21.118 READ DMA
c8 00 56 af 3a 30 e3 00 00:00:17.045 READ DMA
c8 00 58 ad 3a 30 e3 00 00:00:19.379 READ DMA
c8 00 5a ab 3a 30 e3 00 00:00:23.201 READ DMA

Error 5962 occurred at disk power-on lifetime: 10760 hours (448 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 39 cc 3a 30 e3 Error: UNC 57 sectors at LBA = 0x03303acc = 53492428

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 54 b1 3a 30 e3 00 00:00:01.064 READ DMA
c8 00 56 af 3a 30 e3 00 00:00:17.045 READ DMA
c8 00 58 ad 3a 30 e3 00 00:00:19.379 READ DMA
c8 00 5a ab 3a 30 e3 00 00:00:23.201 READ DMA
c8 00 5c a9 3a 30 e3 00 00:00:11.240 READ DMA

Error 5961 occurred at disk power-on lifetime: 10760 hours (448 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 39 cc 3a 30 e3 Error: UNC 57 sectors at LBA = 0x03303acc = 53492428

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 56 af 3a 30 e3 00 00:00:00.327 READ DMA
c8 00 58 ad 3a 30 e3 00 00:00:19.379 READ DMA
c8 00 5a ab 3a 30 e3 00 00:00:23.201 READ DMA
c8 00 5c a9 3a 30 e3 00 00:00:11.240 READ DMA
c8 00 5e a7 3a 30 e3 00 00:00:25.214 READ DMA

Error 5960 occurred at disk power-on lifetime: 10760 hours (448 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 39 cc 3a 30 e3 Error: UNC 57 sectors at LBA = 0x03303acc = 53492428

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 58 ad 3a 30 e3 00 00:00:00.326 READ DMA
c8 00 5a ab 3a 30 e3 00 00:00:23.201 READ DMA
c8 00 5c a9 3a 30 e3 00 00:00:11.240 READ DMA
c8 00 5e a7 3a 30 e3 00 00:00:25.214 READ DMA
c8 00 60 a5 3a 30 e3 00 00:00:20.133 READ DMA

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9292 -

Device does not support Selective Self Tests/Logging
Paulodias
 

Re: Smartmon Tools - Saúde do HD

Mensagempor celocao » Qui Jun 26, 2008 8:01 pm

Instalei o add-on no meu BrazilFW 2.30.1 com kernel modificado,no webadmin chega a aparecer o item smartmoon,é um HD Seagate modelo ST33232A de 3,2GB,aliás uso 2 HDs,um para uso e outro para backup manual.

Smart Tools - HDD Diagnostic

Device Model....: ST33232A
User Capacity...: 3,227,148,288 bytes (3151Mb)
smart.cgi: smart.cgi: 45: seq: not found
smart.cgi: smart.cgi: 45: seq: not found
hda1..........: 12% 88% (40Mb)
smart.cgi: smart.cgi: 49: seq: not found
smart.cgi: smart.cgi: 49: seq: not found
hda2..........: 76% 24% (2096Mb)
Serial Number...: GH043036
Firmware Version: 0.42
ATA Version is..: 2
ATA Standard is.: Not recognized. Minor revision code
smart.cgi: smart.cgi: 55: seq: not found
Temperature (°C): green
[: 8766: unknown operand
[: 731: unknown operand
[: 24: unknown operand
Power On Time...: / hours ( hours)
hdparm Results..:
Timing buffered disk reads: 20 MB in 3.01 seconds = 6.64 MB/sec
Timing buffer-cache reads.......: 656 MB in 2.00 seconds = 328.00 MB/sec

-----------------------------------------------------------
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: ST33232A
Serial Number: GH043036
Firmware Version: 0.42
User Capacity: 3,227,148,288 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 2
ATA Standard is: Not recognized. Minor revision code: 0xffff
Local Time is: Thu Jun 26 23:20:28 2008 EDT
SMART is only available in ATA Version 3 Revision 3 or greater.
We will try to proceed in spite of this.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

PS: Aparentemente ele não possui sensor de temperatura e "suprimiu"alguns outros itens,mas acredito que isso seja pq trata-se de um HD antigo,uma sugestão seria fazer com que esses itens que o HD não tiver como informar sejam "suprimidos" não passando assim uma idéia errada de que trata-se de um "bug"do add-on.

:o! :o! :o! PARABÉNS PELO ADD-ON BENDER,SHOW DE BOLA !!! :o! :o! :o!

Após uma pesquisada no "Google"achei o manual dele:

http://www.seagate.com/support/disc/man ... 342pmb.pdf

Verifiquei que possui suport a função "SMART",estou usando cabo de 80 vias numa placa mãe SOYO K7VTA PRO,com bios atualizada e devidamente habilitada nas opções da mesma em modo "Auto".Abaixo uma parte do manual relativa aos comandos smart...

3.2.1 Supported ATA commands

The following table lists ATA-standard commands that the drive supports.
For a detailed description of the ATA commands, refer to the Draft ATA-4
Standard. See Section 3.2.4 on page 30 for details and subcommands
used in the S.M.A.R.T. implementation.

Command name Command code
Supported by Medalist 4342,3232, 2122, 1722 and 1012

ATA-standard commands

Execute Drive Diagnostics 90H Yes
Execute S.M.A.R.T. Command B0H Yes
Format Track 50H Yes
Identify Device ECH Yes
Initialize Device Parameters 91H Yes
Read Buffer E4H Yes
Read DMA C8H, C9H Yes
Read Long 22H, 23H Yes
Read Multiple C4H Yes
Read Sector(s) 20H, 21H Yes
Read Verify Sector(s) 40H, 41H Yes
Recalibrate 10H Yes
Seek 70H Yes
Set Features EFH Yes
Set Multiple Mode C6H Yes
Write Buffer E8H Yes continued Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual 23
Write DMA CAH, CBH Yes
Write Long 32H, 33H Yes
Write Multiple C5H Yes
Write Same E9H No
Write Sector(s) 30H, 31H Yes

ATA-standard power-management commands

Check Power Mode 98H or E5H Yes
Idle 97H or E3H Yes
Idle Immediate 95H or E1H Yes
Sleep 99H or E6H Yes
Standby 96H or E2H Yes
Standby Immediate 94H or E0H Yes

Não tenho certeza,porém acho que ele não esta usando UDMA,na inicialização parece que esta usando modo "PIO"?!

<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 00:07.1
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
<6> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: ST33232A, ATA DISK drive
<4>blk: queue c0309b20, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: ST33232A, ATA DISK drive
<4>hdd: TSSTcorp CD-ROM SH-C522C, ATAPI CD/DVD-ROM drive
<4>blk: queue c0309f74, I/O limit 4095Mb (mask 0xffffffff)
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<6>hda: 6303024 sectors (3227 MB) w/128KiB Cache, CHS=781/128/63, UDMA(33)
<4>hdc: attached ide-disk driver.
<6>hdc: 6303024 sectors (3227 MB) w/128KiB Cache, CHS=6253/16/63, UDMA(33)
<4>hdd: attached ide-cdrom driver.
<6>hdd: ATAPI 52X CD-ROM drive, 96kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<6>Partition check:
<6> hda: hda1 hda2
<6> hdc: hdc1 hdc2

Um abraço by celocao
celocao
 

Re: Smartmon Tools - Saúde do HD

Mensagempor LkS » Qui Jul 31, 2008 2:05 am

MEL DELS!!! HD DE 190 ANOS!

Device Model....: SAMSUNG SP2001H
User Capacity...: 20,060,135,424 bytes (19589Mb)
hda1..........: 9% 91% (64Mb)
hda2..........: 0% 100% (19510Mb)
Serial Number...: 0486J1FW501086
Firmware Version: QT100-61
ATA Version is..: 6
ATA Standard is.: ATA/ATAPI-6 T13 1410D revision 1
Temperature (°C): 22°
Power On Time...: 190 years/10 months/28 days/16 hours (1673538 hours)
hdparm Results..:
Timing buffered disk reads: 48 MB in 3.02 seconds = 15.89 MB/sec
Timing cached reads.......: 54 MB in 2.00 seconds = 27.00 MB/sec

-----------------------------------------------------------
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP2001H
Serial Number: 0486J1FW501086
Firmware Version: QT100-61
User Capacity: 20,060,135,424 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1
Local Time is: Thu Jul 31 02:04:21 2008 EST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Warning! SMART Attribute Data Structure error: invalid SMART checksum.
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented.
Error logging capability: (0x00) Error logging supported.
No General Purpose Logging support.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 17
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2685
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1673538
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1283
194 Temperature_Celsius 0x0022 172 106 000 Old_age Always - 22
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 094 000 Old_age Always - 3091
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0

Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 0
No Errors Logged

Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 36626
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging
LkS
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Infonetics » Sáb Ago 30, 2008 11:52 pm

Olá equipe BFW!

Adquiri um novo servidor por um preço bem bacana (ver tópico http://www.brazilfw.com.br/forum/viewtopic.php?f=14&t=65746) e instalei o muito útil Smartmon, só que deu um pequeno erro. Segue tela abaixo:

Imagem

O que pode ser? Os HD's SCSI?

Até...
Infonetics
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Infonetics » Seg Set 01, 2008 4:25 pm

Infonetics escreveu:Olá equipe BFW!

Adquiri um novo servidor por um preço bem bacana (ver tópico http://www.brazilfw.com.br/forum/viewtopic.php?f=14&t=65746) e instalei o muito útil Smartmon, só que deu um pequeno erro. Segue tela abaixo:

Imagem

O que pode ser? Os HD's SCSI?

Até...


Amigos?
Infonetics
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Ter Set 02, 2008 8:22 am

O HD é SCSI?

Acho que SCSI não tem suporte a smart.
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Infonetics » Qui Set 04, 2008 12:36 am

Bender escreveu:O HD é SCSI?

Acho que SCSI não tem suporte a smart.


Sim... é SCSI.

Acho que vou ter que desprestigiá-lo Bender, tirando o addon do meu BFW...

Valeu pela solução!!!
Infonetics
 

Re: Smartmon Tools - Saúde do HD

Mensagempor bemlindo » Ter Set 16, 2008 5:39 pm

o meu ta assim olha

Imagem

que erro e esse?
bemlindo
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Qua Set 17, 2008 3:12 pm

Seu hd é Sata?
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor R4Z13L » Seg Out 20, 2008 1:18 pm

Boa Tarde meus caros,

Estou com o mesmo problema do bemlindo mas no meu caso o HD é SATA (MAXTOR STM380215AS)

Estava vendo o erro e o "request" de montagem esta indo para /dev/hda1 (HD IDE) e não para /dev/sda1 (HD SATA)

Segue o erro ao executar o Smartmon Tools:

Device Model....: MAXTOR STM380215AS
User Capacity...: 80,026,361,856 bytes (78150Mb)
df: /dev/hda1: can't find mount point.
smart.cgi: smart.cgi: 44: Syntax error: / 1000

Há algum lugar que posso editar esse "request"?

Cordialmente
R4Z13L
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Qui Out 23, 2008 8:30 am

Tente editar o script e mudar para sda1. É o \var\http\htdocs\cgi-bin\smart.cgi.
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor eduarley » Sex Dez 05, 2008 7:11 am

po aki tb deu o msm erro... como faço esta alteraçao meu hd e sata tb...
eduarley
 

Re: Smartmon Tools - Saúde do HD

Mensagempor eduarley » Sex Dez 05, 2008 7:33 am

resolvi o problema aki...como uso hd sata editei este arquivo smart.cgi
onde era ''hda mudei para sda'' fui em pesquisar e mudei tudo ate ki estava a sim ''hda1 hda2 e hda'' ficou ''sda1 sda2 e sda''
eduarley
 

Re: Smartmon Tools - Saúde do HD

Mensagempor Bender » Sex Dez 05, 2008 11:08 am

:o!
Bender
 

Re: Smartmon Tools - Saúde do HD

Mensagempor eduarley » Sex Dez 05, 2008 11:38 am

Este ai esta resolvido agora esta dando outro tipo de erro....olha ai ...


Device Model....: ST380211AS
User Capacity...: 80,026,361,856 bytes (78150Mb)
sda1..........: 7% 93% (96Mb)
sda2..........: 2% 98% (78043Mb)
Serial Number...: 5PS2CVDC
Firmware Version: 3.AAE
ATA Version is..: 7
ATA Standard is.: Exact ATA specification draft version not indicated
Temperature (°C): green
[: 8766: unknown operand
[: 731: unknown operand
[: 24: unknown operand

Power On Time...: / hours ( hours)
hdparm Results..:
Timing buffered disk reads: 220 MB in 3.00 seconds = 73.33 MB/sec
Timing cached reads.......: 1746 MB in 2.00 seconds = 873.00 MB/sec

-----------------------------------------------------------
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: ST380211AS
Serial Number: 5PS2CVDC
Firmware Version: 3.AAE
User Capacity: 80,026,361,856 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Dec 5 11:40:57 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Error SMART Status command failed
Please get assistance from http://smartmontools.sourceforge.net/
Values from ATA status return descriptor are:
00 09 0e 00 00 00 00 00 00 00 00 00 00 00 00
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.


Os ki estam em negrito... e num apareceu a barrinha verde na temperatura tb n...
eduarley
 

Re: Smartmon Tools - Saúde do HD

Mensagempor kmus2003 » Sex Abr 24, 2009 4:11 am

eu não posso fazer funcionar este addon em meu APbfw ver 2.30.1 . sai-me este erro. can´t load library libstdc++.so.5
kmus2003
 

Próximo

Voltar para Add-On Factory

Quem está online

Usuários navegando neste fórum: Nenhum usuário registrado e 1 visitante

cron