Amigo
Ghost, Saludos y gracias por tu oportuna indicación, distes en el clavo.!!
Este tema
http://www.brazilfw.com.br/forum/viewtopic.php?f=85&t=67086 hay que actualizarlo con las
siguientes recomendaciones y funcionará en cualquier BFW ver. 2.3x (2.31.10, 2.32.2...)
1.) el archivo /etc/rc.d/pkgs/mod.zz_bridge debe quedar asi:
#
# Coyote Bridge Configuration Script
# Claudio Roberto Cussuol - 02/24/2005
# 09-08-2012 (Eugenio Nava)
# To enable the bridge remove or comment the next line
BRIDGE=ENABLEDif [ "$BRIDGE" != "DISABLED" ] ; then
echo Loading Bridge modules...
(cat /etc/modules.bridge; echo) |
while read module args
do
case "$module" in
\#*|"") continue ;;
esac
insmod /lib/modules/bridge/"$module".o $args > /dev/null
done
fi
#Adding the Interfaces
#Usually eth1 = Internet Interface - Do not add it to the bridge
#To Enable the Bridge uncomment these lines
brctl addbr br0ifconfig eth0 up
ifconfig eth0 0.0.0.0
brctl addif br0 eth0
ifconfig eth1 up
ifconfig eth1 0.0.0.0
brctl addif br0 eth1
#ifconfig eth2 up
#ifconfig eth2 0.0.0.0
#brctl addif br0 eth2
#ifconfig eth4 up
#ifconfig eth4 0.0.0.0
#brctl addif br0 eth4
# ... you can add as many interfaces as you have just copying these lines ...
#In order to use the bridge as your local interface you
#have to add this line to the main configuration file (/etc/coyote.conf):
#IF_LOCAL=br0
2.) el archivo a crear /etc/bridge debe tener permisos (755) y debe ser incorporado en el archivo:
/etc/coyote/firewall.local al
principio del mismo y en mi caso solo le coloque:
# Local Custom Firewall rules
# /etc/coyote/firewall.local
# Bridge
/etc/bridge
Nota: no me funciono al colocarlo en /etc/rc.d/rc.local
contenido y ubicación del archivo /etc/bridge
#!/bin/sh
# bridge
iptables -F#iptables -t nat -F
#iptables -X
#iptables -t nat -X
#iptables -t mangle -F
#iptables -t mangle -X
ebtables -Fya que al trabajar con iptables las instrucciones comentadas entraban en conflicto con otras particulares de
mi configuración.
3.) Anexo muestra que demuestra que este Bridge funciona perfecto a pesar de que las IPs de LAN y WAN
estando en la misma sub.red y teniendo la misma (192.168.1.2) y dar un mensaje de error, pero NO hay ningun
tipo de problema, funciona muy bien... excelente!!
Lo demas es seguir las indicaciones del tema:
http://www.brazilfw.com.br/forum/viewtopic.php?f=85&t=67086y aseguro que funciona.!
Nuevamente gracias a quienes apoyaron a aclarar esta duda... muy agradecido...!!
Eugenio Nava