I had a brazilfw 2.30.1 firewall to limit internet accessing.
ADSL modem IP: 192.168.0.1; Telephone line dialing
Modem IP Range: 192.168.0.2-192.168.0.2 (RJ45 connect to BrazilFW PC eth1 internet card)
BrazilFW Internet Configuration: DHCP;DNS Server: 202.188.1.5;Internet Network Device: eth1
BrazilFW LAN Configuration: IP address 192.168.1.1/255.255.255.0;Internet Network Device: eth0
Since the modem set only one IP range, so the BrazilFW eth1 IP address is 192.168.0.2
My DVR device IP address is 192.168.1.3 with TCP Port 9010,9011 and 4080.
NETWORK TYPE : LAN
IP ADDRESS : 192.168.1.3
SUBNET MASK : 255.255.255.0
GATEWAY : 192.168.1.1
DNS SERVER : 202.188.0.133
TCP/IP PORT : 9010
MOBILE PORT : 9011
WEB PORT : 4080
USE UPNP PORT FORWARDING : No
I can access the DVR by http://192.168.1.3:4080 via LAN.
But How to do Port Forward for accessing DVR via internet?
e.g. In IE, I key in http://00123d4f0967.cctv-link.net to access my DVR device. (00123d4f0967 is the MAC address of DVR device; DVR's DDNS setting: DDNS Server is cctv-link.net;TCP/IP Port is 80 )
Without BrazilFW, it is easy to do Virtual Server to do Port Mapping in modem. But BrazilFW make things be complicated. I have to set Port Forward in BrazilFW and Modem as well.
How to do Port forward in brazilFW? I should forward port 9010&9011&4080 of 192.168.1.3 to port 9010&9011&4080 of 192.168.0.2 in brazilFW?
Then in modem, should I map port 9010&9011&4080 of 192.168.0.2 in modem?