BFW Firewall & Router

por **Marcelo - Brazil** » Qui Out 04, 2007 9:38 am

What's your media storage type ?

por **luapufo** » Qui Out 04, 2007 10:07 am

6 BFW com HD IDE de 7200 RPM
1 BFW Com HD SCSI de 10000 RPM

por **gamba47** » Qui Out 04, 2007 1:59 pm

2 BFW with HD IDE 5400rpm

por **Just** » Sex Out 05, 2007 9:25 am

1 BFW with a 16Mb CF.

por **Bender** » Sex Out 05, 2007 2:41 pm

24 BFW rodando em HD IDE de 4.3 a 80Gb (que desperdício de disco!!!).

por **andrefellows** » Sex Out 05, 2007 4:57 pm

1 BFW HD IDE 133 4gb BigFoot, 64MB RAM
1 BFW HD IDE 133 10GB, 256MB RAM
2 BFW HD IDE 133 40GB, 512MB RAM

por **Peart** » Sáb Out 06, 2007 7:34 pm

1 BFW -> HD IDE 2.1GB Quantum

por **jurek** » Dom Out 07, 2007 6:18 am

1 BFW 16MB CF

por **CoyoteX** » Dom Out 07, 2007 7:14 pm

1 BFW (NAT) ---> HD IDE 2 Gb
1 BFW (Bridge)---> HD IDE 20 Gb

por **Giljorak** » Seg Out 08, 2007 8:32 pm

1 BFW --> 128MB Compact Flash card

por **tatan140** » Seg Out 08, 2007 9:07 pm

my BFW this made up of

1 BFW with Argentoqos and Hard Disk IDE 2GB

greetings!

por **jcss001** » Qua Out 10, 2007 4:02 am

01 bfw 2.30 cf 1 gb load balance 03 links internet 60 users

por **cryo** » Qui Out 11, 2007 3:33 am

I have 2 BrazilFW. One boot with floppy (voted) and one with a CF card (can't vote again).

por **Hamski** » Qui Out 11, 2007 6:26 am

ONE BFW on floppy :) FLOPPY RULZ!

por RR » Sáb Out 13, 2007 12:27 am

One BFW with 2.30 on a 32meg Cardflash.
_______________________________________
PIII 1ghz Evo N160 laptop 1x xircom cardbus card for WAN and onboard ethernet Pro 100 for lan. 256megs of ram and a 32meg cardflash card plugged into the IDE interface with a cardflash to 2.5inch IDE adapter.

Custom kernel with cardbus and pcmcia enabled (Thanks Claudio!!). Custom card manager package to turn on pcmcia and cardbus cards. Also a custom module package with xircom module. Other ADD-ONS -> iptraf, openvpn, ipupdate, ssh, ssl wrapper, remote backup, libpthread, libncurses and a few others.

BFW rocks!!

por **DEE_LDO** » Sáb Out 13, 2007 5:34 am

a CF, but don't remember capacity (16MB i guess), then very fast boot !!!

por **The Lightning Stalker** » Sáb Out 13, 2007 2:17 pm

Floppy, because it's cheap and quiet. No hard drive platters spinning and no need to spin them down. When a disk does go bad, I restore it from a backup using WinImage.

por **toni3576** » Sáb Out 13, 2007 11:51 pm

4 BFW 2.30 con discos de 2 a 10GB

por **tioeze** » Dom Out 14, 2007 11:34 am

1 brazil on HD 4.30gb

por **Fábhio Costa** » Ter Out 16, 2007 2:02 am

1 bfw 2.30.1 hd 85mb quantum
1 bfw 2.30.1 hd 130mb seagate

por **elmer17** » Sáb Out 20, 2007 4:17 pm

1x BFW hd ide 340mb 5400rpm

por **boppzoli** » Seg Out 22, 2007 12:37 pm

1 BFW from a 10 GB IDE HDD (P3 500 Mhz + 64 RAM + 2xRTL8139)

I want to build another 2 BFW machines because I have 2 ADSL lines and I want to Load Balance them.

So 2 of the BFW boxes will make the connections (PPPoE) (because the router-modem is unable to handle many-many connections. :roll:

Sorry for my english ...

por **DASOKTOBER** » Ter Out 23, 2007 3:45 pm

1 BFW a partir de um Disco ATA Fujitsu 1.2 GB, funcionando a contento

por **vanderlpp** » Dom Out 28, 2007 8:18 pm

Maquinas novas(Sempron): 2 bfw rodando via pen drive
Maquinas Velhas(PII): 1 bfw rodando de HD (so pra testes)

por **Sacuga** » Seg Out 29, 2007 8:41 pm

Versão do Kernel 2.4.32
Máquina Celeron (Mendocino) 331.835
Uso de Memória Total 62636 kb (100%)
Usada 8292 kb (13%)
Livre 54344 kb (87%)
HD Western Digital 2.0GB

por **Flavio_RJ** » Sex Nov 02, 2007 12:21 pm

1 BFW with HD IDE 10 Gb, 256 Mb RAM, BFW 2.30
1 BFW with HD IDE 10 Gb, 32 Mb RAM, BFW 2.28
1 BFW with HD IDE 1,3 Gb, 64 Mb RAM, BFW 2.30
1 BFW with HD IDE 6,4 Gb, 32 Mb Ram, BFW 2.30

por **nandopsilva** » Sáb Nov 03, 2007 1:15 pm

BFW Pentium III 800 Mhz 1Gb Ram - Squid servindo 172 clientes....

por **Afonso** » Dom Nov 11, 2007 6:59 pm

1 Bfw HD 10 GB - 64 MB RAM - V. 2.3

por **eduardomanzano** » Sáb Nov 17, 2007 6:05 pm

1 BFW 2.30 -K6II 500 -HD 20Gb -32MB Addons Vnstat, iptraf, pureftp e ipupdate.

por **weslei** » Dom Nov 18, 2007 8:56 pm

2 BFW Rodando com Pendrive de 256 e 1GB
1 BFW Rodando com HD20gb

por **Flex6** » Ter Dez 04, 2007 9:53 am

16MB Toshiba Cf-Card :mrgreen:

por **POWerSUrgeSW3** » Qua Fev 06, 2008 2:07 am

IDE 4GB HDD. Works for now until the drive dies and then I'll probably switch over to a thumbdrive.

por **LkS** » Ter Abr 08, 2008 12:58 am

[quote="andrefellows"]1 BFW HD IDE 133 4gb BigFoot, 64MB RAM
1 BFW HD IDE 133 10GB, 256MB RAM
2 BFW HD IDE 133 40GB, 512MB RAM[/quote]

rsrsrsrrs amigo desculpe mas, creio que o bigfoot de 4gb rode a 33 ou no maximo 66 mhz na placa-mae =p

por **lorenzo** » Qua Fev 10, 2010 11:40 am

I used to run it from an old 1gb drive. even 500mb drives work great. one of the very few things they are still good for.

now I have it load from a 2tb mirror raid on my xen server. it's great having a router, trixbox phone server, file server, and whatever else I might need run all on a single motherboard. if only I could find a way to run a media center on it too..

por **MirageIII** » Dom Fev 14, 2010 5:58 pm

4 BFW: Netserver PIII 600 mhz dual cpu, hd scsi raid0 95gb 10000rpm x server 1gb ecc 133mhz c/u
1BFW: duron 1800mhz integrado pcchip M850D 1gb ram cf 16gb 233X

BFW Firewall & Router

My BrazilFW boots from ... [INACTIVE]

My BFW boot from ...

My BrazilFW boots from ...

Re: My BrazilFW boots from ...

Re:

Re: My BrazilFW boots from ...

Re: My BrazilFW boots from ...

Quem está online