squid en argentoqos? [INACTIVE]

[piojacinto]

bueno.. la verdad nose q poner aca.. quiero activar squid en mi server pero me tira este error
---------------
chequeando existencia de comando NICE....
encontrado....
usando prioridad -19

Arrancando Squid
2010/04/25 02:50:06| aclParseAclLine: WARNING: empty ACL: acl pc_negra src "/argentobr/squid/pc_negra"
2010/04/25 02:50:06| aclParseAclLine: WARNING: empty ACL: acl sitios_prohibidos url_regex -i "/argentobr/squid/sitios_prohibidos"
2010/04/25 02:50:06| aclParseAclLine: WARNING: empty ACL: acl sitios_inocentes url_regex -i "/argentobr/squid/sitios_inocentes"
.
..
...
....
.....
......
.......
........
.........
..........
squid no esta funcionando

----------------------------

no uso subredes uso la misma red de brazil 192.168.0.0/24 estoy con argentoqos v4 que me limita la velocidad pero por ejemplo no me fgura en concheck las conecciones ares tampoco me lo bloquea por ip si lo pongo.. abajo dejo la config standart de squid.. q deberia cambiar como para q me arranque? muchas gracias. y el tema de bloquear ares y demas pongo en edit block trash block_protocol_ip ares 192.168.0.2 eso y no me lo bloquea siendo esa la ip de mi pc para probar... que le error? help! y de squid no encontre algun manual para argento..
--------------------------------

acl all src all
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8

acl pc_blanca src "/argentobr/squid/pc_blanca"
acl pc_negra src "/argentobr/squid/pc_negra"
acl NO_cache dstdomain -i "/argentobr/squid/no_cache"
acl sitios_prohibidos url_regex -i "/argentobr/squid/sitios_prohibidos"
acl sitios_inocentes url_regex -i "/argentobr/squid/sitios_inocentes"
acl lista_extensiones urlpath_regex -i "/argentobr/squid/lista_extensiones"

#server_persistent_connections off
#tcp_outgoing_address 192.168.1.20 localnet


#
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT

http_access allow manager localhost
http_access deny manager
# Deny requests to unknown ports
http_access deny !Safe_ports
# Deny CONNECT to other than SSL ports
http_access deny CONNECT !SSL_ports
##########################

hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
no_cache deny NO_cache
no_cache deny QUERY
acl normal_service_net src 192.168.1.66
acl good_service_net src 192.168.1.47
tcp_outgoing_tos 0x00 normal_service_net
tcp_outgoing_tos 0x08 good_service_net
http_access allow pc_negra sitios_inocentes
http_access allow pc_negra !sitios_prohibidos
http_access deny pc_negra
http_access allow pc_blanca
#http_access allow localnet
http_access deny all

icp_access allow pc_blanca
icp_access deny all

http_port 8080 transparent

cache_mem 8 MB
maximum_object_size_in_memory 64 KB

cache_replacement_policy heap LFUDA
cache_dir aufs /partition/cache 10 16 256

max_open_disk_fds 0
minimum_object_size 0 KB
maximum_object_size 40096 KB
cache_swap_low 90
cache_swap_high 95
max_stale 4 week

update_headers on

access_log /partition/squidlog/access.log squid
cache_log /partition/squidlog/cache.log
cache_store_log /partition/squidlog/store.log

logfile_rotate 4

quick_abort_min 0 KB
quick_abort_max 0 KB
log_icp_queries off
client_db off
buffered_logs on
half_closed_clients off

refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
#windows update
refresh_pattern .windowsupdate.com/.*\.(cab|exe) 4320 100% 43200 reload-into-ims


acl shoutcast rep_header X-HTTP09-First-Line ^ICY\s[0-9]
upgrade_http0.9 deny shoutcast

# Apache mod_gzip and mod_deflate known to be broken so don't trust
# Apache to signal ETag correctly on such responses
acl apache rep_header Server ^Apache
broken_vary_encoding allow apache


#
cache_effective_user nobody

#dns_nameservers 10.0.0.1 192.172.0.4

error_directory /partition/squid/share/errors/English

check_hostnames off

hosts_file /etc/hosts

memory_pools off
memory_pools_limit 5 MB
server_persistent_connections off
zph_mode tos
zph_local 0x10


#delay_pools 1 #1
#delay_class 1 2 #1 2
#delay_parameters 1 -1/-1 20000/20000
#acl descargas urlpath_regex -i \.(iso|cab|dll|exe|arj|rar|tar|zip|7z|lzh|lha|png|bmp|mp3|mpga|wav|ra|ram|rm|mov|movie|mpeg|mpg|mpe|wmv|avi|rpm|gz|bz2|deb|ogg|ppt|swf|flv|flash)$
#delay_access 1 allow descargas

# snmp_access allow snmppublic localhost
# snmp_access deny all
#
#Default:
# snmp_access deny all

# TAG: tcp_outgoing_tos
# Allows you to select a TOS/Diffserv value to mark outgoing
# connections with, based on the username or source address
# making the request.
#
# tcp_outgoing_tos ds-field [!]aclname ...
#
# Example where normal_service_net uses the TOS value 0x00
# and good_service_net uses 0x20
#
# acl normal_service_net src 10.0.0.0/255.255.255.0
# acl good_service_net src 10.0.1.0/255.255.255.0
# tcp_outgoing_tos 0x00 normal_service_net
# tcp_outgoing_tos 0x20 good_service_net
#
# TOS/DSCP values really only have local significance - so you should
# know what you're specifying. For more information, see RFC2474 and
# RFC3260.
#
# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or
# "default" to use whatever default your host has. Note that in
# practice often only values 0 - 63 is usable as the two highest bits
# have been redefined for use by ECN (RFC3168).
#
# Processing proceeds in the order specified, and stops at first fully
# matching line.
#
# Note: The use of this directive using client dependent ACLs is
# incompatible with the use of server side persistent connections. To
# ensure correct results it is best to set server_persisten_connections
# to off when using this directive in such configurations.
#
#Default:
# none

# TAG: tcp_outgoing_address
# Allows you to map requests to different outgoing IP addresses
# based on the username or source address of the user making
# the request.
#
# tcp_outgoing_address ipaddr [[!]aclname] ...
#
# Example where requests from 10.0.0.0/24 will be forwarded
# with source address 10.1.0.1, 10.0.2.0/24 forwarded with
# source address 10.1.0.2 and the rest will be forwarded with
# source address 10.1.0.3.
#
# acl normal_service_net src 10.0.0.0/24
# acl good_service_net src 10.0.1.0/24 10.0.2.0/24
# tcp_outgoing_address 10.1.0.1 normal_service_net
# tcp_outgoing_address 10.1.0.2 good_service_net
# tcp_outgoing_address 10.1.0.3
#
# Processing proceeds in the order specified, and stops at first fully
# matching line.
#
# Note: The use of this directive using client dependent ACLs is
# incompatible with the use of server side persistent connections. To
# ensure correct results it is best to set server_persistent_connections
# to off when using this directive in such configurations.
#
#Default:
# none

# TAG: zph_mode
# This option enables packet level marking of HIT/MISS responses,
# either using IP TOS or socket priority.
# off Feature disabled
# tos Set the IP TOS/Diffserv field
# priority Set the socket priority (may get mapped to TOS by OS,
# otherwise only usable in local rulesets)
# option Embed the mark in an IP option field. See also
# zph_option.
#
# See also tcp_outgoing_tos for details/requirements about TOS usage.
#
#Default:
#zph_mode on

# TAG: zph_local
# Allows you to select a TOS/Diffserv/Priority value to mark local hits.
# Default: 0 (disabled).
#
#Default:
# zph_local 0

# TAG: zph_sibling
# Allows you to select a TOS/Diffserv/Priority value to mark sibling hits.
# Default: 0 (disabled).
#
#Default:
# zph_sibling 0

# TAG: zph_parent
# Allows you to select a TOS/Diffserv/Priority value to mark parent hits.
# Default: 0 (disabled).
#
#Default:
# zph_parent 0

# TAG: zph_option
# The IP option to use when zph_mode is set to "option". Defaults to
# 136 which is officially registered as "SATNET Stream ID".
#
#Default:
# zph_option 136

# TAG: emulate_httpd_log on|off
# The Cache can emulate the log file format which many 'httpd'
# programs use. To disable/enable this emulation, set
# emulate_httpd_log to 'off' or 'on'. The default
# is to use the native log format since it includes useful
# information Squid-specific log analyzers use.
#
#Default:
# emulate_httpd_log off

# TAG: log_ip_on_direct on|off
# Log the destination IP address in the hierarchy log tag when going
# direct. Earlier Squid versions logged the hostname here. If you
# prefer the old way set this to off.
#
#Default:
# log_ip_on_direct on


# TAG: mail_program
# Email program used to send mail if the cache dies.
# The default is "mail". The specified program must comply
# with the standard Unix mail syntax:
# mail-program recipient < mailfile
#
# Optional command line options can be specified.
#
#Default:
# mail_program mail

[terry191]

Hola amigo te sale ese error por que no hay nada escrito en esos archivos:

Arrancando Squid
2010/04/25 02:50:06| aclParseAclLine: WARNING: empty ACL: acl pc_negra src "/argentobr/squid/pc_negra"
2010/04/25 02:50:06| aclParseAclLine: WARNING: empty ACL: acl sitios_prohibidos url_regex -i "/argentobr/squid/sitios_prohibidos"
2010/04/25 02:50:06| aclParseAclLine: WARNING: empty ACL: acl sitios_inocentes url_regex -i "/argentobr/squid/sitios_inocentes"

ingresa a ArgentoQoS >
seccion SQUID >
1) Donde dice "pc negra o lista negra" (en este momento no recuerdo el nombre) coloca cualquier direccion IP puede ser
192.168.70.10
la idea es que no este vacia, luego resgardas.

2) Donde dice "Sitios prohibidos" colocas cualquier URL como ejemplo puede ser:
playboy.com
nuevamente la idea es que no este vacia, resguardar.

3) Por ultimo donde dice "sitios Inocentes" colocas algun URL como
candy.com

Resguardas, das en Iniciar SQUID y adios mensaje de error, recuerda que antes tienes que hacer clic en
"INICIAR CACHE" si es que no lo has hecho.

Suerte y Saludos.

[ramiropampa]

Un warning! no impide el funcionamiento de squid, por mas que pongas algún url como bien te indica Terry, creo que hay otra cuestión de fondo, revisa el log cache, seguro ahí te indica el verdadero problema.

Saludos
Ramiro