[1.1 rev4] no logro obtener 100% de velocidad √  [RESUELTO]

Foro dedicado a Argento QoS, Argento Bridge y HDB.

[1.1 rev4] no logro obtener 100% de velocidad √

Mensagempor Horus » Seg Abr 19, 2010 11:22 am

holas..

eh estado haciando unas pruebas, y eh notado que no obtengo la maxima velocidad estando conectado solo (solo mi pc), la prueba lo hice con un archivo descargado desde megaupload (tengo cuenta premium), detras de brazil obtengo hasta 120 kb/s mientras que si conecto mi pc directo al modem, obtengo hasta 490 kb/s y ares me pasa lo mismo, llego a 300 bk/s conectado directo al modem y detras de brazil no mas de 80 kb/s

mi idea (para mi red), es solo distribuir bien mi coneccion y darle prioridad a lo que sea mas importante (paginas web, juegos online, msn), pero siempre usar el 100% de mi internet ..

/argentoqos/class.conf
Código: Selecionar todos
enqueue_class_wan WAN_0 300 300 520 3000 4500 #define velocidades a una clase
enqueue_wan_id WAN_0 300

#definimos backbones
enqueue_parent 4 90000 90000 #lan
#enqueue_parent 2 3500 3500 #cerquita
#enqueue_parent 3 1800 1800 #no tan cerquita

#localnet_no_squid 192.168.0.0/16

#parent_match_yes activamos el reconocimiento como trafico local de squid y de los puertos que especifiquemos en variables.conf
#variable_qos  La misma permite dfinir segun el perfil que se cargue el porcentaje de velocidad que tendra esa clase..
#####################################
enqueue_simple_class 4 148 300 520 3000 4500 parent_match_yes 20000 90000 20000 90000 variable_qos_yes
enqueue_simple_id 4 148 192.168.10.69 bind_yes squid_yes zph_yes 0x10 mac_no 00:1d:72:55:e2:4f
enqueue_simple_id 4 148 192.168.10.96 bind_yes squid_yes zph_yes 0x10 mac_no 00:21:00:0f:93:36
enqueue_simple_id 4 148 192.168.10.150 bind_yes squid_yes zph_yes 0x10 mac_no 00:1e:90:85:31:73
enqueue_simple_id 4 148 192.168.10.200 bind_yes squid_yes zph_yes 0x10 mac_no 00:25:86:ca:f6:ff
#####################################


/argentoqos/variables_normal.conf
Código: Selecionar todos
#Variables de trafico diurno o normal


#Definimos Maximos BAJADA por clase de tráfico
porcentaje_ceil_down_ultra_high="97"
porcentaje_ceil_down_high="95"
porcentaje_ceil_down_norm="90"
porcentaje_ceil_down_low="90"
porcentaje_ceil_down_bulk="90"
porcentaje_ceil_down_trash="90"
porcentaje_ceil_down_unknow="85"
#Definimos Mínimos BAJADA garantizados por clase de tráfico (la suma de las clases no debe superar el %100)
porcentaje_rate_down_ultra_high="30"
porcentaje_rate_down_high="25"
porcentaje_rate_down_norm="10"
porcentaje_rate_down_low="10"
porcentaje_rate_down_bulk="10"
porcentaje_rate_down_trash="10"
porcentaje_rate_down_unknow="5"

#Definimos Maximos SUBIDA por clase de tráfico
porcentaje_ceil_up_ultra_high="80"
porcentaje_ceil_up_high="80"
porcentaje_ceil_up_norm="80"
porcentaje_ceil_up_low="75"
porcentaje_ceil_up_bulk="75"
porcentaje_ceil_up_trash="70"
porcentaje_ceil_up_unknow="70"
#Definimos Mínimos SUBIDA garantizados por clase de tráfico (la suma de las clases no debe superar el %100)
porcentaje_rate_up_ultra_high="30"
porcentaje_rate_up_high="25"
porcentaje_rate_up_norm="15"
porcentaje_rate_up_low="10"
porcentaje_rate_up_bulk="10"
porcentaje_rate_up_trash="5"
porcentaje_rate_up_unknow="1"
#Definimos que prioridad tendra cada clase de tráfico
prio_class="1"
prio_ultra_high="1"
prio_high="2"
prio_norm="3"
prio_low="4"
prio_bulk="5"
prio_trash="6"
prio_unknow="7"
#######################################
#Variables de mini class
#######################################
porcentaje_mini_ceil_high="99"
porcentaje_mini_ceil_norm="80"
porcentaje_mini_ceil_low="50"
porcentaje_mini_ceil_unknow="30"
porcentaje_mini_rate_high="70"
porcentaje_mini_rate_norm="25"
porcentaje_mini_rate_low="4"
porcentaje_mini_rate_unknow="1"
#######################################
prio_mini_class="1"
prio_mini_high="1"
prio_mini_norm="2"
prio_mini_low="3"
prio_mini_unknow="4"
#######################################


/argentoqos/filter.conf

Código: Selecionar todos
##perfil hora pico
##
#sub_ultra_high_tos_updown 0x10 #0x10 minimize delay | 0x08 Maximize-Throughput | 0x04 Maximize-Reliability | 0x02 Minimize-Cost | 0x00 Normal-Service
#sub_ultra_high_tos_updown 0x08
#sub_ultra_high_tos_updown 0x04
#

###################################
qos_variable 90 #indicar porcentaje
###################################

prio_conn_high 20:21
prio_conn_ultra_high 22
prio_conn_high 25
prio_conn_ultra_high 47
prio_conn_ultra_high 53
prio_conn_ultra_high 80
prio_conn_high 110
prio_conn_ultra_high 143
prio_conn_high 443
prio_conn_high 465
prio_conn_high 995
prio_conn_high 1863
prio_conn_ultra_high 1723
prio_conn_high 2083
prio_conn_high 3283
prio_conn_high 3306 #mysql
prio_conn_high 3389
prio_conn_ultra_high 5000:5010 #yahoo audio
prio_conn_high 5050
prio_conn_high 5100 #yahoo webcam
prio_conn_high 5222 #jabber
prio_conn_high 5223 #jabber
prio_conn_high 5432
prio_conn_high 5631
prio_conn_ultra_high 5900
prio_conn_ultra_high 5800
prio_conn_ultra_high 6901
prio_conn_high 7001
prio_conn_ultra_high 7686 #
prio_conn_high 7666
prio_conn_high 8000:8002
prio_conn_high 10200
prio_conn_ultra_high 27000:27039

#sub_ultra_high_l7_updown dns
sub_norm_destination_updown 190.224.143.113
sub_ultra_high_protocol_updown 1 #icmp
sub_high_protocol_updown 50 #vpn
sub_high_protocol_updown 51 #vpn
sub_high_protocol_updown 47 #vpn
sub_high_protocol_updown 50 #vpn
sub_high_protocol_updown 51 #vpn
sub_high_port_updown udp 9 #msn
sub_norm_port_up tcp 20:21 no_ftp
sub_low_port_down tcp 20:21 no_ftp
sub_ultra_high_port_updown udp 22
sub_ultra_high_port_updown tcp 22
sub_low_port_updown tcp 25
sub_ultra_high_port_updown udp 53 # DNS
sub_norm_port_up tcp 80
sub_high_port_down tcp 80
sub_norm_port_down tcp 110
sub_low_port_up tcp 110
sub_high_port_down tcp 443 #htpps
sub_norm_port_up tcp 443 #https
sub_low_port_updown tcp 465 #smtp
sub_high_port_updown udp 500
sub_norm_port_updown tcp 995
sub_trash_port tcp 1157 #ares
sub_trash_port tcp 1214  #kazza
sub_norm_port_updown tcp 1863 # msn
sub_high_port_updown tcp 1723 # vpn microsoft
sub_norm_port_updown tcp 2082:2083 #web mmhost
sub_norm_port_updown tcp 2095 #web mmhost
sub_ultra_high_port_updown udp 3283 # remote desktop mac
sub_ultra_high_port_updown tcp 3283 # remote desktop mac
sub_high_port_updown tcp 3306 #mysql
#sub_ultra_high_port_updown tcp 3389 # remote desktop xp
#sub_ultra_high_port_updown udp 3389 # remote desktop xp
sub_high_port_updown udp 4500 #vpn
sub_trash_port tcp 4662
sub_trash_port udp 4672
sub_ultra_high_port_updown tcp 5000:5010 #yahoo voice chat
sub_ultra_high_port_updown udp 5000:5010 #yahoo voice chat
sub_norm_port_updown tcp 5050 #yahoo messenger
sub_low_port_down tcp 5100 # yahoo webcam
sub_norm_port_updown tcp 5101 # yahoo messages
sub_norm_port_up tcp 5100 #yahoo msn webcam
sub_norm_port_updown tcp 5222 #jabber
sub_norm_port_updown tcp 5223 #jabber
sub_ultra_high_port_updown tcp 5432 # remote desktop mac
sub_ultra_high_port_updown udp 5432 # remote desktop mac
sub_ultra_high_port_updown tcp 5631 #pcanywhere
sub_ultra_high_port_updown udp 5631 #pcanywhere
sub_ultra_high_port_updown tcp 5800 #vnc
sub_ultra_high_port_updown tcp 5900 #vnc
sub_trash_port tcp 6112 #
sub_trash_port tcp 6346
sub_trash_port tcp 6881
sub_norm_port_updown tcp 6891:6900 #msn file transfer
sub_ultra_high_port_updown tcp 6901 #voz msn
sub_ultra_high_port_updown udp 6901 #voz msn
sub_high_port_updown tcp 7001 # msn inicio sesion
sub_high_port_updown udp 7001 # msn inicio sesion
sub_ultra_high_port_updown tcp 7686 #argentum online
sub_ultra_high_port_updown tcp 7666 #argentum online
sub_ultra_high_port_updown udp 7686 #argentum online
sub_ultra_high_port_updown udp 7666 #argentum online
sub_ultra_high_port_updown udp 8000:8002
sub_high_port_updown udp 10001 #vpn esteban pedro varela
sub_high_port_updown udp 10000 #vpn esteban pedro varela
sub_low_port_updown tcp 10051:10070 #irc file transfer
sub_ultra_high_port_updown tcp 10200 #argentum online
sub_trash_port_updown tcp 11161 owner_yes #mldonkey
sub_trash_port_updown udp 11165 owner_yes #mldonkey
sub_trash_port_updown udp 18624
#sub_trash_port tcp 20294
sub_ultra_high_port_updown udp 27000:27039 #counter strike
sub_ultra_high_port_updown tcp 27000:27039 #counter strike
sub_ultra_high_port_updown udp 27898 #alien vs predator 2
sub_trash_port_updown tcp 64000:64754
sub_trash_port_updown udp 64000:64754
#sub_ultra_high_l7_updown quake-halflife
sub_norm_l7_updown skypetoskype
#sub_high_l7_down skypeout
#sub_low_l7_up skypeout #da falsos positivos
sub_norm_l7_updown stun
sub_high_l7_updown ciscovpn
sub_high_l7_updown flash
sub_high_l7_down html
sub_high_l7_down gif
sub_high_l7_down jpeg
sub_high_l7_down png
sub_high_l7_updown ssl
sub_ultra_high_l7_updown rdp # remote desktop xp
sub_norm_l7_updown sip
sub_norm_l7_up html
sub_norm_l7_up gif
sub_bulk_l7_up jpeg
sub_low_l7_up png
sub_bulk_l7_updown ftp
sub_bulk_l7_updown rtsp
sub_bulk_l7_updown http-rtsp
sub_norm_l7_updown msnmessenger
sub_norm_l7_updown yahoo
sub_norm_l7_updown jabber
sub_norm_l7_updown irc
sub_norm_l7_updown imap
sub_norm_l7_updown msn-filetransfer
sub_bulk_l7_updown pdf
sub_bulk_l7_updown exe
sub_high_l7_updown rar
sub_bulk_l7_updown tar
sub_bulk_l7_updown rpm
sub_bulk_l7_updown zip
sub_bulk_l7_down quicktime
sub_low_l7_up quicktime
sub_bulk_l7_down flv
sub_bulk_l7_down httpvideo
sub_low_l7_up httpvideo
sub_low_l7_up flv
sub_bulk_l7_down quicktime
sub_low_l7_up quicktime
sub_bulk_l7_down http-dap
sub_low_l7_up http-dap
sub_trash_l7_updown edonkey
sub_trash_l7_updown bittorrent
sub_trash_l7_updown directconnect
sub_trash_l7_updown fasttrack
sub_trash_l7_updown soulseek
sub_trash_l7_updown ares #solo detecta busquedas
sub_trash_l7_updown gnutella
sub_trash_l7_updown imesh
sub_trash_l7_updown openft
#own_ultra_high_port tcp 22
#own_icmp_ultra_high
#
#
###############mini MANUAL##################
#se pueden utilizar todos estos filtros:
#sub_trash_port_updown tcp 4662
#sub_trash_port_down
#sub_trash_port_up
#sub_trash_l7_updown edonkey
#sub_trash_l7_down
#sub_trash_l7_up
#sub_trash_tos_down
#sub_trash_tos_updown 0x10
#sub_trash_tos_up
#sub_trash_protocol_down
#sub_trash_protocol_updown 47
#sub_trash_protocol_up
#sub_trash_destination_down
#sub_trash_destination_updown 200.54.10.65
#sub_trash_destination_up
#sub_trash_source_port_down
#sub_trash_source_port_updown tcp 5000
#sub_trash_source_port_up
#sub_bulk_port_down
#sub_bulk_port_updown
#sub_bulk_port_up
#sub_bulk_l7_down
#sub_bulk_l7_updown
#sub_bulk_l7_up
#sub_bulk_tos_down
#sub_bulk_tos_updown
#sub_bulk_tos_up
#sub_bulk_protocol_down
#sub_bulk_protocol_updown
#sub_bulk_protocol_up
#sub_bulk_destination_down
#sub_bulk_destination_updown
#sub_bulk_destination_up
#sub_bulk_source_port_down
#sub_bulk_source_port_updown
#sub_bulk_source_port_up
#sub_low_port_up
#sub_low_port_updown
#sub_low_port_down
#sub_low_l7_up
#sub_low_l7_updown
#sub_low_l7_down
#sub_low_tos_down
#sub_low_tos_updown
#sub_low_tos_up
#sub_low_protocol_down
#sub_low_protocol_updown
#sub_low_protocol_up
#sub_low_destination_down
#sub_low_destination_updown
#sub_low_destination_up
#sub_low_source_port_down
#sub_low_source_port_updown
#sub_low_source_port_up
#sub_norm_port_up
#sub_norm_port_updown
#sub_norm_port_down
#sub_norm_l7_up
#sub_norm_l7_updown
#sub_norm_l7_down
#sub_norm_tos_down
#sub_norm_tos_updown
#sub_norm_tos_up
#sub_norm_protocol_down
#sub_norm_protocol_updown
#sub_norm_protocol_up
#sub_norm_destination_down
#sub_norm_destination_updown
#sub_norm_destination_up
#sub_norm_source_port_down
#sub_norm_source_port_updown
#sub_norm_source_port_up
#sub_high_port_up
#sub_high_port_updown
#sub_high_port_down
#sub_high_l7_up
#sub_high_l7_updown
#sub_high_l7_down
#sub_high_tos_down
#sub_high_tos_updown
#sub_high_tos_up
#sub_high_protocol_down
#sub_high_protocol_updown
#sub_high_protocol_up
#sub_high_destination_down
#sub_high_destination_updown
#sub_high_destination_up
#sub_high_source_port_down
#sub_high_source_port_updown
#sub_high_source_port_up
#sub_ultra_high_port_up
#sub_ultra_high_port_updown
#sub_ultra_high_port_down
#sub_ultra_high_l7_up
#sub_ultra_high_l7_updown
#sub_ultra_high_l7_down
#sub_ultra_high_tos_down
#sub_ultra_high_tos_updown
#sub_ultra_high_tos_up
#sub_ultra_high_protocol_down
#sub_ultra_high_protocol_updown
#sub_ultra_high_protocol_up
#sub_ultra_high_destination_down
#sub_ultra_high_destination_updown
#sub_ultra_high_destination_up
#sub_ultra_high_source_port_down
#sub_ultra_high_source_port_updown
#sub_ultra_high_source_port_up
#
###############################################
#MINI
###############################################
sub_mini_norm_port_up tcp 20:21 no_ftp
sub_mini_low_port_down tcp 20:21 no_ftp
sub_mini_high_port_updown udp 22
sub_mini_high_port_updown tcp 22
sub_mini_low_port_updown tcp 25
sub_mini_high_port_updown udp 53 # DNS
sub_mini_norm_port_up tcp 80
sub_mini_norm_port_down tcp 80
sub_mini_norm_port_down tcp 110
sub_mini_low_port_up tcp 110
sub_mini_high_port_down tcp 443 #htpps
sub_mini_norm_port_up tcp 443 #https
sub_mini_low_port_updown tcp 465 #smtp
sub_mini_high_port_updown udp 500
sub_mini_norm_port_updown tcp 8080
sub_mini_norm_port_updown tcp 995
sub_mini_trash_port tcp 1157 #ares
sub_mini_trash_port tcp 1214  #kazza
sub_mini_norm_port_updown tcp 1863 # msn
sub_mini_high_port_updown tcp 1723 # vpn microsoft
sub_mini_norm_port_updown tcp 2082:2083 #web mmhost
sub_mini_norm_port_updown tcp 2095 #web mmhost
sub_mini_high_port_updown udp 3283 # remote desktop mac
sub_mini_high_port_updown tcp 3283 # remote desktop mac
sub_mini_high_port_updown tcp 3306 #mysql
#sub_mini_high_port_updown tcp 3389 # remote desktop xp
#sub_mini_high_port_updown udp 3389 # remote desktop xp
sub_mini_high_port_updown udp 4500 #vpn
sub_mini_high_port_updown tcp 5000:5010 #yahoo voice chat
sub_mini_high_port_updown udp 5000:5010 #yahoo voice chat
sub_mini_norm_port_updown tcp 5050 #yahoo messenger
sub_mini_low_port_down tcp 5100 # yahoo webcam
sub_mini_norm_port_updown tcp 5101 # yahoo messages
sub_mini_norm_port_up tcp 5100 #yahoo msn webcam
sub_mini_norm_port_updown tcp 5222 #jabber
sub_mini_norm_port_updown tcp 5223 #jabber
sub_mini_high_port_updown tcp 5432 # remote desktop mac
sub_mini_high_port_updown udp 5432 # remote desktop mac
sub_mini_high_port_updown tcp 5631 #pcanywhere
sub_mini_high_port_updown udp 5631 #pcanywhere
sub_mini_high_port_updown tcp 5800 #vnc
sub_mini_high_port_updown tcp 5900 #vnc
sub_mini_high_port tcp 6112 #
sub_mini_norm_port_updown tcp 6891:6900 #msn file transfer
sub_mini_high_port_updown tcp 6901 #voz msn
sub_mini_high_port_updown udp 6901 #voz msn
sub_mini_high_port_updown tcp 7001 # msn inicio sesion
sub_mini_high_port_updown udp 7001 # msn inicio sesion
sub_mini_high_port_updown tcp 7686 #argentum online
sub_mini_high_port_updown tcp 7666 #argentum online
sub_mini_high_port_updown udp 7686 #argentum online
sub_mini_high_port_updown udp 7666 #argentum online
sub_mini_high_port_updown udp 8000:8002
sub_mini_high_port_updown udp 10001 #vpn esteban pedro varela
sub_mini_high_port_updown udp 10000 #vpn esteban pedro varela
sub_mini_low_port_updown tcp 10051:10070 #irc file transfer
sub_mini_high_port_updown tcp 10200 #argentum online
sub_mini_high_port_updown udp 27000:27039 #counter strike
sub_mini_high_port_updown tcp 27000:27039 #counter strike
sub_mini_high_port_updown udp 27898 #alien vs predator 2

sub_mini_high_l7_updown http
sub_mini_norm_l7_updown ftp
sub_mini_norm_l7_updown rtsp
sub_mini_norm_l7_updown http-rtsp
sub_mini_norm_l7_updown msnmessenger
sub_mini_norm_l7_updown yahoo
sub_mini_norm_l7_updown jabber
sub_mini_norm_l7_updown irc
sub_mini_norm_l7_updown imap
sub_mini_norm_l7_updown msn-filetransfer



saludos..

PD: el archivo descargado desde megaupload es un rar...
Editado pela última vez por Horus em Qua Abr 28, 2010 1:20 am, em um total de 1 vez.
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Seg Abr 19, 2010 11:34 am

postea variables. conf (variables principales)....

usa tchshow.... para ver como se matchea el trafico....

saludos.
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Seg Abr 19, 2010 11:59 am

/argentoqos/variables.conf
Código: Selecionar todos
#Definimos velocidad de LAN
#LAN_UP="5000"
#LAN_DOWN="5000"
#Definimos velocidad de Internet
QOSBR_UP="520"
QOSBR_DOWN="4500"
QOSBR_UP1="230"
QOSBR_DOWN1="4500"
QOSBR_UP2="230"
QOSBR_DOWN2="2300"
QOSBR_UP3="230"
QOSBR_DOWN3="2300"
#Definimos Placas de Red
IF_LOCALBR="eth0" #aqui va eth0 o eth1 o la placa correspondiente a la LAN
IF_LOCAL_IMQ="imq4"
IF_WAN="eth1" #ppp0 para adsl o ethx para dhcp o ipfija (remplazar a la x por el numero de su interfaz externa)
IF_WAN1="ethx"
IF_WAN2="ethx"
IF_WAN3="ethx"
perturb="10"
burst="200"
qos_cache_dns="yes" #no es funcional
#########
bridgemode="no" #Poner en yes en caso de activar el modo bridge
l7filter="http://www.brazilfw.com.br/users/nachazo/unofficial/l7filter/l7filter.tgz"
httpperl="http://www.brazilfw.com.br/users/nachazo/unofficial/hdb/perl/perl.tgz"
#########
prio_lan="1" #Prioridad que se la da a las conecciones de lan
lastversion="no" #no tocar
#########variables de bind (solo funcionales si se usa class_id)
bind="no" #ya no es funcional
bindip="192.168.10.25" #ya no es funcional
httpsquid="http://www.brazilfw.com.br/users/nachazo/unofficial/hdb/squid_275/squid_hdb_pro.tgz"
QOSSQUID="yes"
estado_de_squid="/tmp/estado_squid"
squidport="8080"
sargport="8082"
logcontrol="yes"
logcontrol_max_space="80000" #espacio maximo tolerado para el peso de los logs.
nice="-19" # prioridad en la que se ejecuta squid
nicesarg="19" # prioridad en la que se ejecuta sarg
###############################
#########puertos locales#######
###############################
change_local_ip="yes" #si queremos dar una ip o subred para que se tomo como trafico local
local_subnet="192.168.0.0/16" #si change_local_ip esta en "yes" se toma el valor local_subnet como trafico local
udp_ports="53,67,68" #dns y dhcp
tcp_ports="8180,22,80,8186,8187,4001,4080" #webmin y http
###############################
sleepclass="no"
sleep="5"
###############################


tcshow
Imagem

saludos..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Seg Abr 19, 2010 12:02 pm

tengo el ares abierto y estaba descargando el archivo desde megaupload...
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Seg Abr 19, 2010 1:33 pm

por lo que veo el trafico de tu descarga no se esta marcando, por ende no aplica en ninguna cola....

3 cosas....

1- Que ip usas vos? de donde bajas el archivo que ip tenes?

2- mientras bajas el archivo postea la tabla mangle...

3- abri 3 ventanas de ssh en una pone el iftop, en otra el tcshow lan download y en la tercera el tcshow wan download.

hace un print screen si podes.

abrazo.
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Seg Abr 19, 2010 2:58 pm

nachazo escreveu:por lo que veo el trafico de tu descarga no se esta marcando, por ende no aplica en ninguna cola....

3 cosas....

1- Que ip usas vos? de donde bajas el archivo que ip tenes?

2- mientras bajas el archivo postea la tabla mangle...

3- abri 3 ventanas de ssh en una pone el iftop, en otra el tcshow lan download y en la tercera el tcshow wan download.

hace un print screen si podes.

abrazo.


1.- 192.168.10.96

2.-
Código: Selecionar todos
Chain PREROUTING (policy ACCEPT 10M packets, 8583M bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 MARK       udp  --  eth0   *       192.168.10.69        192.168.0.0/16      multiport ports 53,67,68 MARK set 0x5c9
    0     0 MARK       tcp  --  eth0   *       192.168.10.69        192.168.0.0/16      multiport ports 8180,22,80,8186,8187,4001,4080 MARK set 0x5c9
    0     0 MARK       icmp --  eth0   *       192.168.10.69        192.168.0.0/16      MARK set 0x5c9
    0     0 RETURN     all  --  eth0   *       192.168.10.69        0.0.0.0/0           MARK match 0x5c9
    0     0 MARK       all  --  eth0   *       192.168.10.69        0.0.0.0/0           MARK set 0x94
  628 40507 MARK       udp  --  eth0   *       192.168.10.96        192.168.0.0/16      multiport ports 53,67,68 MARK set 0x5c9
 1741  161K MARK       tcp  --  eth0   *       192.168.10.96        192.168.0.0/16      multiport ports 8180,22,80,8186,8187,4001,4080 MARK set 0x5c9
    0     0 MARK       icmp --  eth0   *       192.168.10.96        192.168.0.0/16      MARK set 0x5c9
 2369  202K RETURN     all  --  eth0   *       192.168.10.96        0.0.0.0/0           MARK match 0x5c9
 284K   19M MARK       all  --  eth0   *       192.168.10.96        0.0.0.0/0           MARK set 0x94
  299 19460 MARK       udp  --  eth0   *       192.168.10.150       192.168.0.0/16      multiport ports 53,67,68 MARK set 0x5c9
    0     0 MARK       tcp  --  eth0   *       192.168.10.150       192.168.0.0/16      multiport ports 8180,22,80,8186,8187,4001,4080 MARK set 0x5c9
    1    33 MARK       icmp --  eth0   *       192.168.10.150       192.168.0.0/16      MARK set 0x5c9
  300 19493 RETURN     all  --  eth0   *       192.168.10.150       0.0.0.0/0           MARK match 0x5c9
 156K 9262K MARK       all  --  eth0   *       192.168.10.150       0.0.0.0/0           MARK set 0x94
   52  3342 MARK       udp  --  eth0   *       192.168.10.200       192.168.0.0/16      multiport ports 53,67,68 MARK set 0x5c9
    0     0 MARK       tcp  --  eth0   *       192.168.10.200       192.168.0.0/16      multiport ports 8180,22,80,8186,8187,4001,4080 MARK set 0x5c9
    0     0 MARK       icmp --  eth0   *       192.168.10.200       192.168.0.0/16      MARK set 0x5c9
   52  3342 RETURN     all  --  eth0   *       192.168.10.200       0.0.0.0/0           MARK match 0x5c9
 1358  357K MARK       all  --  eth0   *       192.168.10.200       0.0.0.0/0           MARK set 0x94
 478K   40M IMQ        all  --  eth0   *       0.0.0.0/0            0.0.0.0/0           IMQ: todev 4
 785K  821M MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           MARK set 0x0
    0     0 MARK       all  --  eth1   *       190.224.143.113      0.0.0.0/0           MARK set 0xbba
 1260  124K MARK       icmp --  eth1   *       0.0.0.0/0            0.0.0.0/0           MARK set 0xbb8
    0     0 MARK       esp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       ah   --  eth1   *       0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       47   --  eth1   *       0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       esp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       ah   --  eth1   *       0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:9 MARK set 0xbb9
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spts:20:21 MARK set 0xbbb
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:22 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:22 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:25 MARK set 0xbbb
 1145  343K MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:53 MARK set 0xbb8
 499K  600M MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:80 MARK set 0xbb9
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:110 MARK set 0xbba
 1585  697K MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:443 MARK set 0xbb9
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:465 MARK set 0xbbb
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:500 MARK set 0xbb9
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:995 MARK set 0xbba
  484  127K MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:1863 MARK set 0xbba
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:1723 MARK set 0xbb9
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spts:2082:2083 MARK set 0xbba
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:2095 MARK set 0xbba
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:3283 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:3283 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:3306 MARK set 0xbb9
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:4500 MARK set 0xbb9
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spts:5000:5010 MARK set 0xbb8
 5051 1809K MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spts:5000:5010 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5050 MARK set 0xbba
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5100 MARK set 0xbbb
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5101 MARK set 0xbba
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5222 MARK set 0xbba
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5223 MARK set 0xbba
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5432 MARK set 0xbb8
    1   116 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:5432 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5631 MARK set 0xbb8
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:5631 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5800 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:5900 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spts:6891:6900 MARK set 0xbba
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:6901 MARK set 0xbb8
    1   122 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:6901 MARK set 0xbb8
   35  1684 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:7001 MARK set 0xbb9
   11   526 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:7001 MARK set 0xbb9
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:7686 MARK set 0xbb8
  602 72971 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:7666 MARK set 0xbb8
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:7686 MARK set 0xbb8
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:7666 MARK set 0xbb8
    2   256 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spts:8000:8002 MARK set 0xbb8
   23  2377 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:10001 MARK set 0xbb9
  101 12123 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:10000 MARK set 0xbb9
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spts:10051:10070 MARK set 0xbbb
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spt:10200 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp dpt:11161 MARK set 0xbbd
    0     0 RETURN     tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp dpt:11161
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp dpt:11165 MARK set 0xbbd
    0     0 RETURN     udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp dpt:11165
    0     0 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:18624 MARK set 0xbbd
73477   34M MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spts:27000:27039 MARK set 0xbb8
    0     0 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spts:27000:27039 MARK set 0xbb8
    2   143 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spt:27898 MARK set 0xbb8
   12   552 MARK       tcp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           tcp spts:64000:64754 MARK set 0xbbd
  134 18702 MARK       udp  --  eth1   *       0.0.0.0/0            0.0.0.0/0           udp spts:64000:64754 MARK set 0xbbd
   40  3899 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto skypetoskype MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto stun MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto ciscovpn MARK set 0xbb9
  208  275K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto flash MARK set 0xbb9
  390  164K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto html MARK set 0xbb9
  733  325K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto gif MARK set 0xbb9
12649   13M MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto jpeg MARK set 0xbb9
 1309 1711K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto png MARK set 0xbb9
 1319  685K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto ssl MARK set 0xbb9
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto rdp MARK set 0xbb8
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto sip MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto ftp MARK set 0xbbc
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto rtsp MARK set 0xbbc
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto http-rtsp MARK set 0xbbc
  159 49996 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto msnmessenger MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto yahoo MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto jabber MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto irc MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto imap MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto msn-filetransfer MARK set 0xbba
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto pdf MARK set 0xbbc
   94  123K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto exe MARK set 0xbbc
  641  690K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto rar MARK set 0xbb9
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto tar MARK set 0xbbc
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto rpm MARK set 0xbbc
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto zip MARK set 0xbbc
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto quicktime MARK set 0xbbc
73348  109M MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto flv MARK set 0xbbc
 319K  451M MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto httpvideo MARK set 0xbbc
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto quicktime MARK set 0xbbc
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto http-dap MARK set 0xbbc
   26  7702 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto edonkey MARK set 0xbbd
 4064  905K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto bittorrent MARK set 0xbbd
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto directconnect MARK set 0xbbd
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto fasttrack MARK set 0xbbd
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto soulseek MARK set 0xbbd
 2483  152K MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto ares MARK set 0xbbd
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto gnutella MARK set 0xbbd
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto imesh MARK set 0xbbd
    0     0 MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto openft MARK set 0xbbd
 195K  182M MARK       all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           MARK match 0x0 MARK set 0xbbe
 785K  821M IMQ        all  --  eth1   *       0.0.0.0/0            0.0.0.0/0           IMQ: todev 0

Chain INPUT (policy ACCEPT 4508K packets, 3865M bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 5548K packets, 4718M bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 MARK       all  --  *      *       0.0.0.0/0            192.168.1.48        MARK set 0xbb9
    0     0 RETURN     all  --  *      *       0.0.0.0/0            192.168.1.48       
    0     0 MARK       all  --  *      *       192.168.1.48         0.0.0.0/0           MARK set 0xbb9
    0     0 RETURN     all  --  *      *       192.168.1.48         0.0.0.0/0           

Chain OUTPUT (policy ACCEPT 4556K packets, 3904M bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 MARK       udp  --  *      eth0    192.168.0.0/16       192.168.10.69       multiport ports 53,67,68 MARK set 0x5c9
    0     0 MARK       tcp  --  *      eth0    192.168.0.0/16       192.168.10.69       multiport ports 8180,22,80,8186,8187,4001,4080 MARK set 0x5c9
    0     0 MARK       icmp --  *      eth0    192.168.0.0/16       192.168.10.69       MARK set 0x5c9
    0     0 MARK       all  --  *      eth0    0.0.0.0/0            192.168.10.69       TOS match 0x10 MARK set 0x5c9
  630  170K MARK       udp  --  *      eth0    192.168.0.0/16       192.168.10.96       multiport ports 53,67,68 MARK set 0x5c9
 1566  514K MARK       tcp  --  *      eth0    192.168.0.0/16       192.168.10.96       multiport ports 8180,22,80,8186,8187,4001,4080 MARK set 0x5c9
   11   718 MARK       icmp --  *      eth0    192.168.0.0/16       192.168.10.96       MARK set 0x5c9
 2989 2898K MARK       all  --  *      eth0    0.0.0.0/0            192.168.10.96       TOS match 0x10 MARK set 0x5c9
  299 87101 MARK       udp  --  *      eth0    192.168.0.0/16       192.168.10.150      multiport ports 53,67,68 MARK set 0x5c9
    0     0 MARK       tcp  --  *      eth0    192.168.0.0/16       192.168.10.150      multiport ports 8180,22,80,8186,8187,4001,4080 MARK set 0x5c9
    1    33 MARK       icmp --  *      eth0    192.168.0.0/16       192.168.10.150      MARK set 0x5c9
 3102 3309K MARK       all  --  *      eth0    0.0.0.0/0            192.168.10.150      TOS match 0x10 MARK set 0x5c9
   50 13214 MARK       udp  --  *      eth0    192.168.0.0/16       192.168.10.200      multiport ports 53,67,68 MARK set 0x5c9
    0     0 MARK       tcp  --  *      eth0    192.168.0.0/16       192.168.10.200      multiport ports 8180,22,80,8186,8187,4001,4080 MARK set 0x5c9
    0     0 MARK       icmp --  *      eth0    192.168.0.0/16       192.168.10.200      MARK set 0x5c9
  201  247K MARK       all  --  *      eth0    0.0.0.0/0            192.168.10.200      TOS match 0x10 MARK set 0x5c9

Chain POSTROUTING (policy ACCEPT 11M packets, 8646M bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 RETURN     all  --  *      eth0    0.0.0.0/0            192.168.10.69       MARK match 0x5c9
    0     0 MARK       all  --  *      eth0    0.0.0.0/0            192.168.10.69       MARK set 0x94
    0     0 MARK       tcp  --  *      *       0.0.0.0/0            192.168.10.69       tcp spt:8080 MARK set 0x94
    0     0 RETURN     tcp  --  *      *       0.0.0.0/0            192.168.10.69       tcp spt:8080
    0     0 RETURN     all  --  *      *       192.168.0.0/16       192.168.10.69       
 5009 3535K RETURN     all  --  *      eth0    0.0.0.0/0            192.168.10.96       MARK match 0x5c9
 511K  703M MARK       all  --  *      eth0    0.0.0.0/0            192.168.10.96       MARK set 0x94
 406K  579M MARK       tcp  --  *      *       0.0.0.0/0            192.168.10.96       tcp spt:8080 MARK set 0x94
 406K  579M RETURN     tcp  --  *      *       0.0.0.0/0            192.168.10.96       tcp spt:8080
    0     0 RETURN     all  --  *      *       192.168.0.0/16       192.168.10.96       
 3402 3396K RETURN     all  --  *      eth0    0.0.0.0/0            192.168.10.150      MARK match 0x5c9
 167K  110M MARK       all  --  *      eth0    0.0.0.0/0            192.168.10.150      MARK set 0x94
16477   18M MARK       tcp  --  *      *       0.0.0.0/0            192.168.10.150      tcp spt:8080 MARK set 0x94
16477   18M RETURN     tcp  --  *      *       0.0.0.0/0            192.168.10.150      tcp spt:8080
    0     0 RETURN     all  --  *      *       192.168.0.0/16       192.168.10.150     
  251  260K RETURN     all  --  *      eth0    0.0.0.0/0            192.168.10.200      MARK match 0x5c9
 1324  905K MARK       all  --  *      eth0    0.0.0.0/0            192.168.10.200      MARK set 0x94
  708  626K MARK       tcp  --  *      *       0.0.0.0/0            192.168.10.200      tcp spt:8080 MARK set 0x94
  708  626K RETURN     tcp  --  *      *       0.0.0.0/0            192.168.10.200      tcp spt:8080
    0     0 RETURN     all  --  *      *       192.168.0.0/16       192.168.10.200     
 530K   44M MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           MARK set 0x0
    0     0 MARK       all  --  *      *       192.168.10.1         192.168.10.1        MARK set 0xbb8
    0     0 RETURN     all  --  *      *       192.168.10.1         192.168.10.1       
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:20:21 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:22 flags:0x16/0x02 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:25 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:47 flags:0x16/0x02 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:53 flags:0x16/0x02 MARK set 0xbb8
 5689  340K MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:80 flags:0x16/0x02 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:110 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:143 flags:0x16/0x02 MARK set 0xbb8
  146  7056 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:443 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:465 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:995 flags:0x16/0x02 MARK set 0xbb9
   10   508 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:1863 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:1723 flags:0x16/0x02 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:2083 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:3283 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:3306 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:3389 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:5000:5010 flags:0x16/0x02 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5050 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5100 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5222 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5223 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5432 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5631 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5900 flags:0x16/0x02 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5800 flags:0x16/0x02 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:6901 flags:0x16/0x02 MARK set 0xbb8
    9   464 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:7001 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:7686 flags:0x16/0x02 MARK set 0xbb8
    5   240 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:7666 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:8000:8002 flags:0x16/0x02 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:10200 flags:0x16/0x02 MARK set 0xbb9
   60  2880 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:27000:27039 flags:0x16/0x02 MARK set 0xbb8
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            190.224.143.113     MARK set 0xbba
  741 68886 MARK       icmp --  *      eth1    0.0.0.0/0            0.0.0.0/0           MARK set 0xbb8
    0     0 MARK       esp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       ah   --  *      eth1    0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       47   --  *      eth1    0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       esp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       ah   --  *      eth1    0.0.0.0/0            0.0.0.0/0           MARK set 0xbb9
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:9 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:20:21 MARK set 0xbba
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:22 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:22 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:25 MARK set 0xbbb
 1145 74228 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:53 MARK set 0xbb8
 282K   18M MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:80 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:110 MARK set 0xbbb
 1631  498K MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:443 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:465 MARK set 0xbbb
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:500 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:995 MARK set 0xbba
  449 82699 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:1863 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:1723 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:2082:2083 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:2095 MARK set 0xbba
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:3283 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:3283 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:3306 MARK set 0xbb9
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:4500 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:5000:5010 MARK set 0xbb8
 5982  295K MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpts:5000:5010 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5050 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5101 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5100 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5222 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5223 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5432 MARK set 0xbb8
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:5432 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5631 MARK set 0xbb8
    1    62 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:5631 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5800 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:5900 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:6891:6900 MARK set 0xbba
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:6901 MARK set 0xbb8
    1    62 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:6901 MARK set 0xbb8
   46  2124 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:7001 MARK set 0xbb9
   17  2435 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:7001 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:7686 MARK set 0xbb8
  627 26634 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:7666 MARK set 0xbb8
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:7686 MARK set 0xbb8
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:7666 MARK set 0xbb8
    1    62 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpts:8000:8002 MARK set 0xbb8
   27  3719 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:10001 MARK set 0xbb9
  117 14604 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:10000 MARK set 0xbb9
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:10051:10070 MARK set 0xbbb
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpt:10200 MARK set 0xbb8
    0     0 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp spt:11161 MARK set 0xbbd
    0     0 RETURN     tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp spt:11161
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp spt:11165 MARK set 0xbbd
    0     0 RETURN     udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp spt:11165
    0     0 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:18624 MARK set 0xbbd
78568 3976K MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpts:27000:27039 MARK set 0xbb8
   60  2880 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:27000:27039 MARK set 0xbb8
    2   344 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpt:27898 MARK set 0xbb8
    3   148 MARK       tcp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           tcp dpts:64000:64754 MARK set 0xbbd
  169 18116 MARK       udp  --  *      eth1    0.0.0.0/0            0.0.0.0/0           udp dpts:64000:64754 MARK set 0xbbd
   49  6852 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto skypetoskype MARK set 0xbba
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto stun MARK set 0xbba
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto ciscovpn MARK set 0xbb9
  180  8652 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto flash MARK set 0xbb9
 1194  447K MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto ssl MARK set 0xbb9
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto rdp MARK set 0xbb8
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto sip MARK set 0xbba
  287 23106 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto html MARK set 0xbba
  547 30967 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto gif MARK set 0xbba
10798  916K MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto jpeg MARK set 0xbbc
  995 53711 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto png MARK set 0xbbb
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto ftp MARK set 0xbbc
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto rtsp MARK set 0xbbc
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto http-rtsp MARK set 0xbbc
  147 28575 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto msnmessenger MARK set 0xbba
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto yahoo MARK set 0xbba
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto jabber MARK set 0xbba
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto irc MARK set 0xbba
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto imap MARK set 0xbba
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto msn-filetransfer MARK set 0xbba
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto pdf MARK set 0xbbc
   81  4200 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto exe MARK set 0xbbc
  611 31760 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto rar MARK set 0xbb9
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto tar MARK set 0xbbc
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto rpm MARK set 0xbbc
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto zip MARK set 0xbbc
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto quicktime MARK set 0xbbb
 144K 7498K MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto httpvideo MARK set 0xbbb
33302 1731K MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto flv MARK set 0xbbb
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto quicktime MARK set 0xbbb
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto http-dap MARK set 0xbbb
   39  2825 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto edonkey MARK set 0xbbd
 4227  556K MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto bittorrent MARK set 0xbbd
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto directconnect MARK set 0xbbd
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto fasttrack MARK set 0xbbd
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto soulseek MARK set 0xbbd
 3917 1706K MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto ares MARK set 0xbbd
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto gnutella MARK set 0xbbd
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto imesh MARK set 0xbbd
    0     0 MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           LAYER7 l7proto openft MARK set 0xbbd
 150K   18M MARK       all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           MARK match 0x0 MARK set 0xbbe

Chain l7-filter (0 references)
 pkts bytes target     prot opt in     out     source               destination         


3.-
http://i655.photobucket.com/albums/uu27 ... /iftop.jpg

el tcshow no me funciona
me sale
Imagem

saludos...
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Seg Abr 19, 2010 4:36 pm

tipo de conecccion?

adsl pppoe?
adsl ipfija?

cable modem dhcp?

otra?
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Seg Abr 19, 2010 7:41 pm

nachazo escreveu:tipo de conecccion?

adsl pppoe?
adsl ipfija?

cable modem dhcp?

otra?


es cablemodem....


mi brazil es un pIII 866 mhz 190 ram 30 gb HDD....

5 pcs como maximo, 3 navegando constantemente
internet: 4500/550

saludos..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Seg Abr 19, 2010 8:36 pm

Horus escreveu:
nachazo escreveu:tipo de conecccion?

adsl pppoe?
adsl ipfija?

cable modem dhcp?

otra?


es cablemodem....


mi brazil es un pIII 866 mhz 190 ram 30 gb HDD....

5 pcs como maximo, 3 navegando constantemente
internet: 4500/550

saludos..


lo primero...

apaga todas las pcs y usa solo 1...

segundo es muy raro que no te marque trafico mientras realizas una descarga grande el "tcshow wan download".... algo anda mal...

en principio tus configuracions son correctas... se me ocurre que comentes todos los filtros de l7 para descartar un tema de procesador chico...

saludos.
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Seg Abr 19, 2010 9:28 pm

ahora si ...

reinicie brazil y pude usar tcshow

http://i655.photobucket.com/albums/uu273/horoos/ya.jpg


saludos...
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Ter Abr 20, 2010 1:10 am

no esta encolando tu trafico porque no es reconocido...

si estas haciendo una descarga en ese momento no bajaba a mas de 16 kb... lo cual no es nada...

estabas bajando algo en ese momento?
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Ter Abr 20, 2010 7:51 pm

nachazo escreveu:no esta encolando tu trafico porque no es reconocido...

si estas haciendo una descarga en ese momento no bajaba a mas de 16 kb... lo cual no es nada...

estabas bajando algo en ese momento?



sii tenia el ares funcionando, descargando un rar desde megaupload y un video desde youtuve...


saludos..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Ter Abr 20, 2010 8:00 pm

horus no se ven las ip en el iftop....

sacale la resolucion dns y ponele la opcion de ver puertos...

realiza el mismo procedimiento.... 3 putty 1 iftop 2 tcshow...

postea...

saludos.
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Ter Abr 20, 2010 8:27 pm

nachazo escreveu:horus no se ven las ip en el iftop....

sacale la resolucion dns y ponele la opcion de ver puertos...



sorry, pero como lo hago???

saludos..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Ter Abr 20, 2010 9:17 pm

me castigo, busque en google (es que pensaba que se hacia atraves de brasil)

A continuación listo algunas opciones que pueden ayudar a ordenar y filtrar el listado de iftop:

* Si no se ejecuta mostrando algún error de acceso a la interfaz eth0, seleccionar otra interfaz activa con el parámetro ”-i”, quedando de esta forma: iftop -i eth1
* Para mostrar los puertos de las conexiones (remoto y local), presionar “p”
* Para alternar la disposición de la lista (2 filas por host, 1 fila, entrada, salida), presionar “t”
* Para habilitar/deshabilitar la resolucion de nombres (DNS), presionar “n”
* Para mostrar la ayuda del programa, ejecutar: iftop –help


http://i655.photobucket.com/albums/uu273/horoos/ya2.jpg


ahi estaba descargando el mismo archivo desde megaupload..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Qua Abr 21, 2010 12:15 am

ahora posteate.... un iftop pero con el qos desactivado...

bajando el mismo archivo....

aver que pasa...
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Qua Abr 21, 2010 2:19 am

Imagem

saludos..

PD: descargando desde megaupload y ares funcionando...
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Qua Abr 21, 2010 11:04 am

no es problema de argento qos...

al desactivar el qos el archivo baja lento...

saludos.
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Qua Abr 21, 2010 11:25 am

parece que estaba saturada mi net en ese momento..

mira hace poco lo probe..

sin QOS
http://i655.photobucket.com/albums/uu273/horoos/ya4.jpg

con QOS
http://i655.photobucket.com/albums/uu273/horoos/ya5.jpg



saludos..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor niraseco » Qua Abr 21, 2010 1:02 pm

Hola Horus,
Probá cambiar el MTU de tu eth0 y eth1.
Falcon hace poco comentó un problema de que su estaba lenta (viewtopic.php?f=9&t=73827#p214707), resulta que yo tengo días de estar así con esa misma situación.
Entonces decidí travesear lo que sugiere falcon, y Eureka!!!, mejoró mucho la latencia de mi red, agregá esto por consola:
ifconfig eth0 mtu 1492
ifconfig eth1 mtu 1492

Si te funciona, agregalo después al rc.local. Para que quede "automático".

Espero que te ayude, a mí me quito un dolor de cabeza que tengo desde hace una semana, pensaba que el squid y sus delay pool no funcionaba (no usaba qos para nada, limite puertos para evitar averias de p2p) y volvi a instalar todo pera con el qos nativo de brazilfw, el problema se repetia, hice lo que comenta falcon y me funcionó.

Saludos
niraseco
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Qua Abr 21, 2010 1:16 pm

niraseco escreveu:Hola Horus,
Probá cambiar el MTU de tu eth0 y eth1.
Falcon hace poco comentó un problema de que su estaba lenta (viewtopic.php?f=9&t=73827#p214707), resulta que yo tengo días de estar así con esa misma situación.
Entonces decidí travesear lo que sugiere falcon, y Eureka!!!, mejoró mucho la latencia de mi red, agregá esto por consola:
ifconfig eth0 mtu 1492
ifconfig eth1 mtu 1492

Si te funciona, agregalo después al rc.local. Para que quede "automático".

Espero que te ayude, a mí me quito un dolor de cabeza que tengo desde hace una semana, pensaba que el squid y sus delay pool no funcionaba (no usaba qos para nada, limite puertos para evitar averias de p2p) y volvi a instalar todo pera con el qos nativo de brazilfw, el problema se repetia, hice lo que comenta falcon y me funcionó.

Saludos


no me sirvio, igual sigue bajando a muy baja velocidad, desactivo el qos y vuela en 3 segundos llega a 500 kb/s, no creo ke tenga latencia en mi red, porque juego cs online y tengo un lag de maximo 60 (por lo general 47)

saludos, gracias de todos modos :D
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor ZaPa » Qua Abr 21, 2010 1:26 pm

Hola.

Si no encola el tráfico en ninguna de las colas creadas con tc (por argento qos) como bien dice nachazo es que iptables no esta matchenado (no encuentra coincidencias)..

No he mirado en el código de argento qos como nachazo a querido crear sus diferentes clases. Pero, por lo general es recomendable el tráfico desconocido (el que no coincida con ninguna de las otras clases) se vaya a esa clase (normalmente el de más baja latencia).

Y es lo que creo que esta ocurriendo, al no matchear iptables, al descargar un fichero lo toma como "basura" y te aplica baja prioridad por eso esa velocidad tan baja....

¿Has verificado que no tengas ningun script de iptables externo a argento qos?
La gente cuando trabaja con iptables y crea cualquier script para cualquier fin, siempre realizan un flush de reglas en casi todos los enganches que van a trabajar. ¿En que se traduce? Que las reglas que aplique argento qos sean borradas.

Es lo único que se me ocurre que tengas algun script externo que lo que este haciendo es borrar las politicas de concordancia (match) de iptables.


También verifica que tengas bien definidias las placas de red en la configuración general de argento qos.


Si te sigue sin funcionar, postea, y te intentaremos hechar una mano.


ZaPa.
ZaPa
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Qua Abr 21, 2010 1:32 pm

no eh hecho ningun script, lo que si, eh instalado algunos addons para mostrar las velocidades: Bandwidth Monitoring y otro que no recuerdo el nobre (uno que muestra las velocidad en tiempo real en la parte superior del web admin, al lado del baner)


saludos..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Qua Abr 21, 2010 2:16 pm

Horus escreveu:Imagem

saludos..

PD: descargando desde megaupload y ares funcionando...



si estaba saturada en los totales tendria que mostrarte la saturacion de subida o de bajada... y no es asi...
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Qua Abr 21, 2010 2:51 pm

borre todo lo que sale en /argentoqos/filter.conf y aun asi sigue el problema... :(


saludos..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor WTC2009 » Qua Abr 21, 2010 4:51 pm

by niraseco » Wed Apr 21, 2010 1:02 pm
Hola Horus,
Probá cambiar el MTU de tu eth0 y eth1.
Falcon hace poco comentó un problema de que su estaba lenta (viewtopic.php?f=9&t=73827#p214707), resulta que yo tengo días de estar así con esa misma situación.
Entonces decidí travesear lo que sugiere falcon, y Eureka!!!, mejoró mucho la latencia de mi red, agregá esto por consola:
ifconfig eth0 mtu 1492
ifconfig eth1 mtu 1492

Si te funciona, agregalo después al rc.local. Para que quede "automático".

Espero que te ayude, a mí me quito un dolor de cabeza que tengo desde hace una semana, pensaba que el squid y sus delay pool no funcionaba (no usaba qos para nada, limite puertos para evitar averias de p2p) y volvi a instalar todo pera con el qos nativo de brazilfw, el problema se repetia, hice lo que comenta falcon y me funcionó.

Saludos


como lo agrego al rc.local ya que solo aqui aparecen estos dos lineas por fa ayudame para despejar la duda


#!/bin/sh
# Brazilfw Local Command Init Script :?: :?:
WTC2009
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor niraseco » Qua Abr 21, 2010 5:46 pm

WTC2009 escreveu:
by niraseco » Wed Apr 21, 2010 1:02 pm
Hola Horus,
Probá cambiar el MTU de tu eth0 y eth1.
Falcon hace poco comentó un problema de que su estaba lenta (viewtopic.php?f=9&t=73827#p214707), resulta que yo tengo días de estar así con esa misma situación.
Entonces decidí travesear lo que sugiere falcon, y Eureka!!!, mejoró mucho la latencia de mi red, agregá esto por consola:
ifconfig eth0 mtu 1492
ifconfig eth1 mtu 1492

Si te funciona, agregalo después al rc.local. Para que quede "automático".

Espero que te ayude, a mí me quito un dolor de cabeza que tengo desde hace una semana, pensaba que el squid y sus delay pool no funcionaba (no usaba qos para nada, limite puertos para evitar averias de p2p) y volvi a instalar todo pera con el qos nativo de brazilfw, el problema se repetia, hice lo que comenta falcon y me funcionó.

Saludos


como lo agrego al rc.local ya que solo aqui aparecen estos dos lineas por fa ayudame para despejar la duda


#!/bin/sh
# Brazilfw Local Command Init Script :?: :?:


En el webAdmin, te vás a Archivo, luego a: Guiones de Incio de Comandos Locales,

Copias y pegas estas lineas:
ifconfig eth0 mtu 1492
ifconfig eth1 mtu 1492

Luego le das Ok, resguarda tu configuración, reinicia tu server. Eso te ayuda a fragmentar los paquetes que recibe y transmite el server brazil, logrando que la latencia baje.

Saludos
niraseco
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Ter Abr 27, 2010 8:22 pm

existe alguna configuracion para poder usar algo de argento?? (squid y dividir la velocidad entre los usuarios de la red)


saludos..
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Ter Abr 27, 2010 8:25 pm

Horus escreveu:existe alguna configuracion para poder usar algo de argento?? (squid y dividir la velocidad entre los usuarios de la red)


saludos..


muy offtopic y ademas no te entendi la pregunta... por favor abrir post nuevo.
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor Horus » Ter Abr 27, 2010 8:28 pm

nachazo escreveu:
Horus escreveu:existe alguna configuracion para poder usar algo de argento?? (squid y dividir la velocidad entre los usuarios de la red)


saludos..


muy offtopic y ademas no te entendi la pregunta... por favor abrir post nuevo.



es que aun no puedo obtener 100% de velocidad (tuve que desactivar QOS) y quiciera saber como puedo hacer para poder usar aunque sea squid y distribuir la velocidad entre los usuarios...

saludos...
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad  [RESUELTO]

Mensagempor Horus » Qua Abr 28, 2010 12:04 am

al parecer era problema de ram, porque desinstale "bandwidth monitoring tool" y descargue un archivo desde microsoft y bajo relativamente rapido ( 380 kb/s)

aqui dejo lo que me habias pedido anteriormente

http://i655.photobucket.com/albums/uu273/horoos/ya6.jpg

saludos.. (espero que alla solucionado mi problema :D )
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad

Mensagempor nachazo » Qua Abr 28, 2010 12:31 am

era lo que quedaba descartar....

trata de ponerle la menor cantidad de add-ons posibles para hacer la primera puesta en marcha...

saludos.
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad √

Mensagempor Horus » Qua Abr 28, 2010 1:22 am

gracias por la ayuda, le puse un √ como solucionado..


me surgieron una dudas con las clases...

asi que cuando tenga tiempo, abrire otro topic :D

saludos cordiales
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad √

Mensagempor nachazo » Qua Abr 28, 2010 12:06 pm

Horus escreveu:gracias por la ayuda, le puse un √ como solucionado..


me surgieron una dudas con las clases...

asi que cuando tenga tiempo, abrire otro topic :D

saludos cordiales


perfecto esperamos tus consultas. :o!

saludos.
nachazo
 

Re: [1.1 rev4] no logro obtener 100% de velocidad √

Mensagempor gamba47 » Qua Abr 28, 2010 11:36 pm

Horus, espero que nos ayudes a responder a los usuarios sus dudas, estos días aprendistes mucho y la mejor manera de tenerlo fresco en tu cabeza es devolviendolo diariamente al foro.

gamba47
Avatar do usuário
gamba47
BFW Beneméritos
 
Mensagens: 7243
Registrado em: Ter Dez 27, 2005 1:51 pm
Localização: Buenos Aires, Argentina
BrazilFW Box: Pentium4 1256mb RAM HD 200gb
BrazilFW 3.0.237 without Squid
3 ADSLs & 1 Cablemodem
50 Users & more!

Re: [1.1 rev4] no logro obtener 100% de velocidad √

Mensagempor Horus » Qui Abr 29, 2010 8:18 pm

nachazo escreveu:
Horus escreveu:gracias por la ayuda, le puse un √ como solucionado..


me surgieron una dudas con las clases...

asi que cuando tenga tiempo, abrire otro topic :D

saludos cordiales


perfecto esperamos tus consultas. :o!

saludos.


pronto XD..

saludos..

gamba47 escreveu:Horus, espero que nos ayudes a responder a los usuarios sus dudas, estos días aprendistes mucho y la mejor manera de tenerlo fresco en tu cabeza es devolviendolo diariamente al foro.

gamba47


porsupuesto, esa es la idea, como ustedes me contribuyen con informacion y ayuda, lo minimo que puedo hacer es devolver la mano hacia otros usuarios :D

no se si seria mucho perdir, pero creo que seria bueno que en las pagina de informacion de los addons, salgan los requerimientos minimos o cuanta ram usa o tambien en que maquina fue testeado y con que otros addons....

saludos cordiales...
Avatar do usuário
Horus
BFW Very Participative
 
Mensagens: 311
Registrado em: Qui Abr 02, 2009 12:34 pm
BrazilFW Box:

Re: [1.1 rev4] no logro obtener 100% de velocidad √

Mensagempor nachazo » Qui Abr 29, 2010 8:36 pm

porsupuesto, esa es la idea, como ustedes me contribuyen con informacion y ayuda, lo minimo que puedo hacer es devolver la mano hacia otros usuarios :D

no se si seria mucho perdir, pero creo que seria bueno que en las pagina de informacion de los addons, salgan los requerimientos minimos o cuanta ram usa o tambien en que maquina fue testeado y con que otros addons....

saludos cordiales...


simplemente p2 en adelante con 64 mb de ram en adelante....

Estas invitado ha completar cualquier bache que veas en la documentacion. :o!

saludos.
nachazo
 


Voltar para Serie de add-ons Argento

Quem está online

Usuários navegando neste fórum: Nenhum usuário registrado e 1 visitante